Description
The Stono is a ground spike light for the garden, staked directly into soil or a planted border to throw light upward and out across foliage, paths and feature plants. It takes a single E27 lamp up to 20W, running from a 220-240V AC mains supply, and accepts GLS, CFL or LED sources so the brightness and tone can be set by the bulb you fit. In US terms this sits with landscape and pathway spike lighting, marking edges and grazing planting rather than lighting a whole space.
Because this is accent and pathway lighting rather than ambient room lighting, its effect is best judged by where the spike is positioned and which lamp goes in. Push it into a bed to wash a shrub or small tree, line a path or driveway edge to define the route after dark, or angle it against a wall or fence to graze the surface. With a Ø390 mm shade it casts a broad pool around the spike, so spacing several along a border gives even coverage between fittings rather than a single tight beam.
The body is moulded ABS in a granite finish, sized at Ø390 by 370 mm and weighing 1.74 kg, with an IP65 rating that makes it weatherproof for fully exposed outdoor and wet locations. The integral spike anchors it into the ground, with no wall or recessed fixing involved, so it can be repositioned as planting grows. The E27 lampholder is open so a dimmable LED can be used where the supply allows. The Stono range offers further outdoor spike options in the same finish.
Specification
| Power |
max 20W |
| Voltage |
220-240 AC |
| IP rating |
IP65 |
| Mounting |
Ground Spike |
| Cap / base |
E27 |
| Light source |
GLS/CFL/LED |
| Dimensions |
Ø390 × 370 mm |
| Weight |
1.74 kg |
| Material |
Abs |
| Finish |
Granite |
Downloads
Frequently Asked
Is the Stono suitable for outdoor use?
Yes. It carries an IP65 rating, so it is weatherproof and rated for fully exposed outdoor and wet locations such as open borders and driveways. The spike anchors it into soil or a planted bed.
Does it run on mains or a low-voltage transformer?
It runs directly from a 220-240V AC mains supply, so no separate low-voltage transformer is required. Wiring should be installed by a qualified electrician using suitably rated outdoor cable and connections.
Is a bulb included?
No bulb is supplied. The fitting takes a single E27 lamp up to 20W and accepts GLS, CFL or LED sources, so you can choose the output and colour tone to suit the planting or path you are lighting.
How do I clean it?
Wipe the granite ABS housing with a soft, damp cloth to clear soil splashes and garden debris, then dry it. Switch off and let the lamp cool first, and avoid abrasive cleaners that could mark the finish.