Stivi 36W Ø330 LED Bulkhead IP65 - White

The Stivi is a round LED bulkhead drawing 36W and putting out 4680 lumens at a neutral 4000K white, with a wide 110 degree spread for even, shadow-free light across the area it covers. American buyers will recognise this format as an outdoor wall pack or wall sconce, the kind of fixed surface light used to wash a doorway or stairwell. Running on 220 to 240V AC mains and built around an integrated LED rated at 130 lm/W, it is a sealed all-in-one fitting with no separate bulb to replace.

It mounts on both walls and ceilings, so it works equally well above an external door, along a covered walkway, or on a soffit. With its IP65 rating it copes with fully exposed positions and direct rain, which makes it a sound choice for porches, garage and outbuilding exteriors, bin stores, stairwells and communal entrances. The 110 degree beam throws a broad pool of light rather than a tight spot, so a single unit lights a doorway and the ground in front of it well, and a run of them keeps a passage or car park edge evenly lit. The neutral 4000K tone reads clean and practical for these access and security duties.

The body is moulded polycarbonate in a white finish, with an IK08 impact rating that gives useful resistance to knocks in busy or public areas. The integrated driver sits inside the sealed housing, so installation is a straightforward surface fix to wall or ceiling with no external gear to specify. This fitting is not dimmable, runs at a fixed 4000K, and is rated for 50,000 hours. At Ø330 by 54mm and 970g it stays low-profile against the surface. The Stivi range includes further wattage and size options for matching fittings across a site.

Can the Stivi be used outdoors?

Yes. It carries an IP65 rating, which means it is fully weatherproof and suitable for exposed outdoor positions as well as wet locations. It is well suited to porches, walkways, garage exteriors and communal entrances where it may face direct rain.

Does it take a separate bulb?

No. The Stivi is an integrated LED fitting, so the light source is built into the sealed housing rather than using a replaceable lamp such as an E27. This keeps the unit weathertight and rated for around 50,000 hours of use.

Where is this bulkhead typically used?

It mounts on both walls and ceilings, making it a flexible choice for external doorways, covered passages, soffits, stairwells, bin stores and car park edges. The wide 110 degree beam and 4680 lumen output suit access and security lighting where even coverage matters more than a tight beam.

How should the Stivi be cleaned and maintained?

Wipe the polycarbonate diffuser with a soft damp cloth to clear dust, cobwebs and grime that can dull the output over time, and avoid abrasive cleaners that could scratch the surface. Always isolate the power first. The IK08-rated body resists knocks, so it stands up well to cleaning in busier outdoor areas.