Description
The Stivi is a round LED bulkhead that draws 15W and puts out 1800 lumens of neutral 4000K white, spread through a wide 110 degree beam for even wash across the area below. A built-in PIR sensor brings the light up on movement, so the fitting only runs when someone is present. Across the Atlantic this style of fitting is the outdoor wall pack or wall sconce, the compact round unit used to mark doorways and passageways.
The 110 degree spread and motion trigger suit entrances, porches, side passages, stairwells, garages and communal corridors, where light is wanted on approach rather than constantly. Mounted at standard door-head or eaves height, the wide beam covers the immediate threshold and the path leading to it. Coverage is best judged by the throw across the doorway and approach it lights on detection, not by room area, since this is task and security lighting rather than ambient ceiling light.
Built from polycarbonate with a white finish, the Stivi carries an IP65 rating for full weatherproofing against rain and wet conditions and an IK08 impact rating for knock resistance, so it holds up in exposed outdoor and high-traffic spots. It fixes to either a wall or a ceiling and runs direct from 220-240V AC mains, with the integrated LED and PIR built in. This model is not dimmable. The Stivi range includes plain non-sensor versions for areas that need constant light.
Specification
| Power |
15W |
| Voltage |
220-240 AC |
| Luminous flux |
1800 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP65 |
| IK rating |
IK08 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø220 × 62 mm |
| Weight |
544 g |
| Material |
Polycarbonate |
| Finish |
White |
Downloads
Frequently Asked
Is the Stivi suitable for outdoor use?
Yes. It carries an IP65 rating, which means it is fully weatherproof and protected against rain and water jets. This makes it suitable for exposed outdoor walls, porches and entrances as well as damp indoor areas.
How does the built-in PIR sensor work?
The integrated PIR detects movement within the fitting's range and switches the light on automatically, then off again after the area is clear. This is useful for entrances, garages and passageways where light is only needed on approach rather than left on continuously.
Can it be mounted on a ceiling as well as a wall?
Yes. The Stivi is rated for both wall and ceiling mounting, so it can sit above a doorway or be fixed to a porch soffit or garage ceiling. The round form gives an even spread in either position.
How should the diffuser be cleaned?
Wipe the polycarbonate diffuser with a soft damp cloth once the fitting is switched off and cool. Avoid abrasive pads or harsh solvents, which can dull the surface. Keeping it clear of dust and cobwebs helps the PIR detect movement reliably and maintains full light output.