Stivi 10W Ø220 LED Bulkhead with PIR Sensor IP65 - White

The Stivi is a round LED bulkhead drawing 10W and delivering 1200 lumens at a neutral 4000K white, with a built-in PIR sensor that brings the light on as movement is detected. The wide 110 degree beam spreads light evenly across the wall and the ground below rather than throwing a tight spot, so doorways, paths and corners are covered the moment someone approaches. North American buyers will know this format as an outdoor wall pack or motion-activated wall sconce, the surface-mounted disc that handles entrances and perimeter walls.

Measuring Ø220 millimetres and weighing 544 grams, the Stivi suits front and back doorways, porches, side passages, garages and outbuildings where automatic security and access lighting is wanted. The PIR keeps it dark until needed, so it works well on a path or by a gate without running all night. Coverage is best judged by reach rather than a room area: the 1200 lumen output and broad beam give a generous pool of light around the fitting, marking the immediate approach and the threshold clearly. It mounts to a wall or to a ceiling soffit, making it equally at home under a porch roof or on an exposed external wall.

The body is moulded polycarbonate in a white finish, rated IP65 for full weatherproofing against rain and wet conditions and IK08 for impact resistance, so it stands up to exposed outdoor positions. The integrated LED is rated for 50,000 hours and the fitting is not dimmable, running directly from a 220-240V AC supply with the PIR controlling switching. It surface-mounts to wall or ceiling with no recessing required. The wider Stivi range includes plain non-sensor versions for sheltered indoor runs alongside this PIR model.

Can the Stivi be used outdoors?

Yes. It carries an IP65 rating, which means it is fully weatherproof and suitable for exposed outdoor and wet locations such as external walls, porches and passageways. The IK08 rating also gives it solid impact resistance for knocks and weather.

How does the PIR sensor work?

The built-in passive infrared sensor detects movement nearby and switches the light on automatically, then off again after a set period of no activity. This makes it well suited to doorways, paths and garages where you want hands-free security and access lighting rather than a light left on all night.

Where can I mount it?

The Stivi is surface-mounted and can fix to either a wall or a ceiling soffit, so it works under a porch roof as well as on an upright external wall. At Ø220mm and 544 grams it is compact and light enough for standard masonry or timber fixings.

How do I keep it clean?

Wipe the polycarbonate body and diffuser with a soft, damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents that could mark the white finish, and keeping the sensor lens clear helps the PIR detect movement reliably.