Description
The Stealth is a 113cm tall wall light built from six cylindrical metal tubes arranged in a staggered vertical formation against a black backplate. Each tube is finished in matt black on the outside and brushed brass on the inside, with the open angled ends facing outward to reveal the warm brass interior. Six E27 lamp holders sit within the tubes (bulbs sold separately), casting light upward and downward along the wall.
Mounted vertically, its 113cm height reads as a single sculptural run, and it can also be mounted horizontally. Stairwells, hallway end walls, double-height entrance halls and feature walls in lounges suit it well. Mounted on a standard wall fixing plate, it projects 10cm from the surface and washes light up and down the wall in six discrete columns rather than a single flood, producing layered shadows along the adjacent surfaces.
The metal frame combines a matt black exterior with a brushed gold-brass interior, giving the fixture two distinct readings depending on viewing angle: a darker silhouette from straight on, and warmer brass tones when viewed from the side or when lit. At 26cm wide and 10cm deep, the proportions stay slim relative to the height, so the Stealth reads as a slim accent rather than occupying significant wall real estate. The 6 x E27 capacity allows the user to choose bulb temperature, wattage and style (filament, globe or standard GLS) to suit the room.
Specification
| Height |
113cm |
| Width |
26cm |
| Depth |
10cm |
| Material |
Metal |
| Wattage |
6 x E27 25W |
| Warranty |
2 Year |
Downloads
Product manual
Frequently Asked
What bulbs does the Stealth take?
The fixture uses six standard E27 (Edison screw) bulbs, sold separately. Filament-style GLS bulbs suit the industrial look, while frosted LEDs give a softer wash. Each lamp holder takes a bulb up to 25W.
How is it mounted?
The Stealth fixes to the wall via a backplate behind the central black column. It requires hard-wiring to a mains supply at the mounting point, so positioning needs to be planned around an existing or new lighting point. Installation should be carried out by a qualified electrician.
Is it suitable for bathrooms?
No IP rating is specified for this fixture, so it is intended for dry indoor locations only. Use it in hallways, stairwells, lounges and bedrooms rather than bathrooms or covered outdoor areas.
Can it be mounted horizontally?
Yes. It can be mounted vertically or horizontally. Mounted horizontally, the tubes throw light left and right along the wall instead of up and down.