Free Delivery on all orders over £99*
Save 30%

Spark 60W 1400mA Constant Current Dimmable LED Driver

£11399
RRP £16200
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Spark is a 60W constant current LED driver delivering 1400mA regulated output to connected LED fixtures. Built by Ideal Lux in a compact 125 x 85mm plastic enclosure with an IP20 rating, the driver converts 230V AC mains to stable DC current for powering LED arrays, panels and strip systems requiring 1400mA operation.

Designed for recessed installation in ceiling voids, control cabinets and behind architectural lighting systems, the Spark pairs constant current regulation with dimming compatibility. The driver accepts dimming signals from compatible phase-cut dimmers, 0-10V controllers and DALI systems depending on the installation configuration, allowing connected LED lighting to be adjusted from full brightness down to low-level ambient without flicker.

The constant current output maintains 1400mA across the driver's operating range regardless of load variation or input voltage fluctuation, preventing LED degradation and colour shift that occurs when current delivery becomes unstable. The compact footprint allows the driver to fit within standard ceiling void depths and electrical enclosures without requiring custom mounting solutions. Ideal Lux backs the driver with a 5-year warranty covering manufacturing defects and component failure under normal operating conditions.

Specification
Length (mm) 125
Projection (mm) 85
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What dimming systems does the Spark support?

The Spark accepts dimming signals from phase-cut dimmers, 0-10V controllers and DALI systems depending on installation wiring. Check the driver's connection terminals and consult the technical specification for the exact dimming protocol supported by this model.

What LED systems can this driver power?

The 60W output at 1400mA suits LED arrays, panel lights and strip systems designed for constant current operation at 1400mA. The driver is not suitable for LED bulbs or integrated fittings with built-in drivers.

Can it be installed in bathrooms?

The IP20 rating means the driver is not protected against water ingress and must be installed outside bathroom zones or inside sealed IP-rated enclosures that provide the necessary protection for the specific bathroom zone.

What mounting depth is needed?

The 85mm projection determines the minimum void depth required for recessed installation. Allow additional clearance for cable connections and ventilation around the driver enclosure to prevent heat build-up during operation.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Spark is a 60W constant current LED driver delivering 1400mA regulated output to connected LED fixtures. Built by Ideal Lux in a compact 125 x 85mm plastic enclosure with an IP20 rating, the driver converts 230V AC mains to stable DC current for powering LED arrays, panels and strip systems requiring 1400mA operation.

    Designed for recessed installation in ceiling voids, control cabinets and behind architectural lighting systems, the Spark pairs constant current regulation with dimming compatibility. The driver accepts dimming signals from compatible phase-cut dimmers, 0-10V controllers and DALI systems depending on the installation configuration, allowing connected LED lighting to be adjusted from full brightness down to low-level ambient without flicker.

    The constant current output maintains 1400mA across the driver's operating range regardless of load variation or input voltage fluctuation, preventing LED degradation and colour shift that occurs when current delivery becomes unstable. The compact footprint allows the driver to fit within standard ceiling void depths and electrical enclosures without requiring custom mounting solutions. Ideal Lux backs the driver with a 5-year warranty covering manufacturing defects and component failure under normal operating conditions.

    Specification
    Length (mm) 125
    Projection (mm) 85
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What dimming systems does the Spark support?

    The Spark accepts dimming signals from phase-cut dimmers, 0-10V controllers and DALI systems depending on installation wiring. Check the driver's connection terminals and consult the technical specification for the exact dimming protocol supported by this model.

    What LED systems can this driver power?

    The 60W output at 1400mA suits LED arrays, panel lights and strip systems designed for constant current operation at 1400mA. The driver is not suitable for LED bulbs or integrated fittings with built-in drivers.

    Can it be installed in bathrooms?

    The IP20 rating means the driver is not protected against water ingress and must be installed outside bathroom zones or inside sealed IP-rated enclosures that provide the necessary protection for the specific bathroom zone.

    What mounting depth is needed?

    The 85mm projection determines the minimum void depth required for recessed installation. Allow additional clearance for cable connections and ventilation around the driver enclosure to prevent heat build-up during operation.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.