Free Delivery on all orders over £99*

SMD LED Strip 7.2W/m RGB 5m IP65 - Colour Changing

£1999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This SMD LED strip is a flexible 5 metre reel of spaced SMD diodes, drawing up to 7.2W per metre and running on 12V DC. It is a colour changing RGB strip, so the same run shifts through red, green, blue and the mixed tones in between using a compatible controller. Known to many buyers as LED tape or a light strip, it is the type used for under-cabinet lines, cove detailing and outline runs where a slim, continuous source is wanted. The reel cuts to length at the marked points, so the run can be sized to the space rather than fixed at 5 metres.

Because it carries an IP65 rating, the strip suits damp and exposed positions as well as dry interiors: kitchen plinths, bathroom coving, garden eaves, pergola edges and patio outlines all work. As an RGB accent rather than ambient room lighting, it is best judged on the effect it gives rather than a coverage area, washing colour along a skirting, shelf edge or step nose and grazing light across a surface it is fixed to. Mounted behind a diffuser channel the line of diodes softens into an even glow, while a bare run keeps a brighter, more defined edge of colour.

The strip is supplied on a flexible adhesive-backed reel measuring 5000mm long. It runs on 12V DC, so it is not a mains-direct fitting and needs a matching 12V LED driver, sized to the total wattage of the length used and bought separately unless supplied as part of a kit. Cut only at the marked intervals, then connect to the driver and an RGB controller to set the colour. Rated for around 15,000 hours, the IP65 coating seals the diodes against splashes and weather. Other lengths and white-tone strips, plus drivers and aluminium channels, are available across our LED strip range.

Specification
Power 7.2 W/m
Luminous flux 1 lm/m
Efficiency 0 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP65
Colour RGB
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this LED strip need a driver?

Yes. It runs on 12V DC, not mains voltage, so it needs a 12V LED driver sized to the total wattage of the length you use. At 7.2W per metre, work out the wattage of your run and choose a driver with a little headroom. The driver is sold separately unless bought as part of a kit.

Can the strip be cut to length?

Yes. The reel is designed to be cut to length, but only at the marked cut points printed along the strip. Cutting elsewhere can break the circuit on that section. Each cut piece can then be wired back to the driver and controller.

Can it be used outdoors or in a bathroom?

Yes. The IP65 rating makes it weatherproof and suitable for damp and exposed locations such as garden eaves, patios, pergolas and bathroom coving. It resists splashes and rain, though it should not be fully submerged. For dry indoor runs it works equally well.

How do I change the colours?

This is an RGB strip, so the colour is set through a separate RGB controller wired between the driver and the strip. The controller lets you select solid colours, mix tones and use any preset or fade modes it offers. Without a controller the strip cannot change colour, so factor one into the setup.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This SMD LED strip is a flexible 5 metre reel of spaced SMD diodes, drawing up to 7.2W per metre and running on 12V DC. It is a colour changing RGB strip, so the same run shifts through red, green, blue and the mixed tones in between using a compatible controller. Known to many buyers as LED tape or a light strip, it is the type used for under-cabinet lines, cove detailing and outline runs where a slim, continuous source is wanted. The reel cuts to length at the marked points, so the run can be sized to the space rather than fixed at 5 metres.

    Because it carries an IP65 rating, the strip suits damp and exposed positions as well as dry interiors: kitchen plinths, bathroom coving, garden eaves, pergola edges and patio outlines all work. As an RGB accent rather than ambient room lighting, it is best judged on the effect it gives rather than a coverage area, washing colour along a skirting, shelf edge or step nose and grazing light across a surface it is fixed to. Mounted behind a diffuser channel the line of diodes softens into an even glow, while a bare run keeps a brighter, more defined edge of colour.

    The strip is supplied on a flexible adhesive-backed reel measuring 5000mm long. It runs on 12V DC, so it is not a mains-direct fitting and needs a matching 12V LED driver, sized to the total wattage of the length used and bought separately unless supplied as part of a kit. Cut only at the marked intervals, then connect to the driver and an RGB controller to set the colour. Rated for around 15,000 hours, the IP65 coating seals the diodes against splashes and weather. Other lengths and white-tone strips, plus drivers and aluminium channels, are available across our LED strip range.

    Specification
    Power 7.2 W/m
    Luminous flux 1 lm/m
    Efficiency 0 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP65
    Colour RGB
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this LED strip need a driver?

    Yes. It runs on 12V DC, not mains voltage, so it needs a 12V LED driver sized to the total wattage of the length you use. At 7.2W per metre, work out the wattage of your run and choose a driver with a little headroom. The driver is sold separately unless bought as part of a kit.

    Can the strip be cut to length?

    Yes. The reel is designed to be cut to length, but only at the marked cut points printed along the strip. Cutting elsewhere can break the circuit on that section. Each cut piece can then be wired back to the driver and controller.

    Can it be used outdoors or in a bathroom?

    Yes. The IP65 rating makes it weatherproof and suitable for damp and exposed locations such as garden eaves, patios, pergolas and bathroom coving. It resists splashes and rain, though it should not be fully submerged. For dry indoor runs it works equally well.

    How do I change the colours?

    This is an RGB strip, so the colour is set through a separate RGB controller wired between the driver and the strip. The controller lets you select solid colours, mix tones and use any preset or fade modes it offers. Without a controller the strip cannot change colour, so factor one into the setup.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.