Description
A compact outdoor wall light with a squat, rectangular body in anthracite and an opal white diffuser that softens the light rather than letting it glare. The LED sits inside the housing and gives a warm white output, drawing 10W for 370 lumens, which reads as a friendly pool of light at a door rather than anything floodlit. At 220mm across it keeps a low profile and stays close to the wall, so it does not crowd a narrow porch or a tight passage.
We reach for this one at back doors, along side passages and either side of a front entrance, where the job is simply to show a step, a keyhole and a threshold. It also earns its place on a garden wall, beside a garage door or above a bin store. The housing is sealed against dust and splashing water, so rain and wind-blown grit are no trouble. There is no switch on the body and the light is not dimmable, so it runs from an indoor switch, a timer or a photocell arrangement, whichever suits the way you come and go.
The anthracite finish is a matt grey-black that sits quietly against brick, render and painted timber alike, and the opal panel is the only bright element on it. Give it a wipe with a damp cloth each spring, once the power is off and the fitting is cold, to clear off the film that builds up over a wet winter; a dry cloth afterwards keeps water marks off the finish. It carries a three year warranty. Because the LED is built in, we stock a replacement module for the Skelly and Haysi range should you ever need one, which means the fitting need not come off the wall for good at the end of the module's life. Two of these flanking a door look better than one hung centrally above it.
Specification
| Colour |
Anthracite |
| Ceiling Mountable |
Yes |
| Weight |
4.90KG |
| Length |
220mm |
| Height |
99mm |
| Projection |
100mm |
| Materials Used |
Die-cast Aluminium, Polycarbonate |
| Adjustable Height |
No |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 10W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
370lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
10W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Shade Material |
PC |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How bright is it, and what colour is the light?
It produces 370 lumens at 3000K, a warm white that looks closer to a traditional bulb than a cool security lamp. It is bright enough to light a doorstep and a step or two of path.
Can I dim it?
No. It is a non-dimmable fitting and should be run on a plain switched circuit rather than a dimmer.
How much wall does it take up?
It is 220mm long, 99mm high and projects 100mm from the wall, so it suits narrow reveals and shallow porches.
Is it suitable for an exposed wall?
Yes. It is rated IP54, which covers dust and splashing water from any direction, so an open wall or an unsheltered doorway is fine.
Do I need to buy a bulb?
No, the LED is integrated. If the module fails in time, we stock the replacement 10W LED module used across the Skelly and Haysi range.
What warranty does it have?
It carries a three year warranty from the manufacturer.