Description
Black organza over a broad, shallow cylinder: 35cm across with a low profile, so the shade reads as a clean circle from below rather than a deep drum. The weave gives the black a soft sheen and lets a little light glow through the sides, while the bulk of the light falls downward. We like it where a taller shade would crowd the space, either over a table or on a slim lamp base. The shape is plain and the edge crisp, which keeps the attention on the fabric itself.
This is a non-electric shade, so it takes its power from whatever it sits on, and it is happy on a pendant flex or on a table lamp. A GLS A60 LED is the lamp we would choose for it, up to 20W, which keeps the temperature low inside a fabric shade of this depth. It suits a pair of bedside lamps, a hallway console, a reading corner, or a low pendant hung over a kitchen island where headroom is tight.
Organza is a fine fabric and wants a gentle hand: a soft brush or a low vacuum setting across the outer face now and then, kept dry, and dust lifted from the inside rather than rubbed at. Keep it out of long hours of direct sun and the black holds its depth. It carries a one year warranty. We stock the same cylinder in organza in a smaller size and in cream, and in faux silk in black, white, grey and a few quieter two-tone finishes if you would rather a warmer cast to the light. Lamps are not included.
Specification
| Colour |
Black |
| Weight |
0.40KG |
| Diameter |
350mm |
| Height |
150mm |
| Materials Used |
Ribbon Organza, Iron |
| Energy Class |
Not Applicable |
| Lamp Cap |
Non-Electric |
| Recommended Lamp |
LED (GLS A60) |
| Maximum Wattage |
20W |
| Lamps Included |
No |
| Protection Class |
Non-Electric |
| IP Rating |
IP20 |
| Shade Socket |
E27 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Black |
| Shade Dimensions (mm) |
D:350mm x H:150mm |
| Shade Hole Diameter (mm) |
42mm |
| Shade Material |
Organza Fabric, Metal Frame |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Yes-Subject To Use |
| Suitable For |
Dual Mount |
| Product Care |
(1) Remove dust from shade with microfiber cloth, lint roller or upholstery brush. |
| Country of Origin |
China |
Frequently Asked
What are the exact dimensions?
It is 350mm in diameter and 150mm high, a wide and deliberately shallow cylinder.
How big is the hole at the top?
The shade hole measures 42mm, the common size for a pendant flex or a lamp holder.
Can I use it on a ceiling pendant as well as a lamp?
Yes. It is a dual mount shade, so it works on a pendant flex or on a table or floor lamp.
Which lamp should I use?
A GLS A60 LED is the sensible choice, rated no higher than 20W. Lamps are supplied separately.
What is the shade made from?
Black organza, a fine open-weave fabric that gives the surface a slight sheen and passes a little light through the sides.
How should I clean it?
Dry cleaning only: a soft brush or a vacuum on its lowest setting. Avoid water, sprays and any rubbing of the weave.