Description
This Knightsbridge screened TV outlet module is a single coaxial aerial outlet designed for grid systems, measuring 25 x 50mm with a grey ABS finish. The module is fully screened to EN 50083-2, providing low signal loss, minimal ingress and negligible cross-talk between adjacent modules. The female coaxial connection accepts standard aerial plugs and the internal clamp and screw terminal secures cables with a 1mm conductor (compatible with PF100, H109F, QF100 and similar cable types).
Designed for modular grid installation in residential and commercial settings, the outlet fits Knightsbridge grid plates and frames that accommodate 25 x 50mm modules. The module requires a minimum mounting box depth of 35mm behind the wall plate and recesses 30mm into the back box when fitted. The screening and isolation make the module suitable for multi-room aerial distribution systems where signal integrity matters.
The grey finish matches Knightsbridge's grid system colour range, allowing the TV outlet to be paired with sockets, data modules, switches and other grid accessories in a unified plate. The IP20 rating confirms the module is designed for dry indoor use and not suitable for bathrooms, kitchens or outdoor locations. Cable connections are accessed from the rear of the module and the clamp terminal provides tool-free strain relief once the screw is tightened.
Specification
| Height |
50 mm |
| Width |
25 mm |
| Recessed Depth |
30 mm |
| Min. Mounting Box Depth |
35mm |
| Construction |
ABS |
| Finish |
Grey |
| IP Rating |
IP20 |
| TV Connection Type |
Female |
| Terminal |
Clamp & Screw Terminal |
| Warranty |
1 |
Downloads
Product Specification Sheet
Frequently Asked
What cable types are compatible?
The module accepts coaxial aerial cables with a 1mm conductor, including PF100, H109F and QF100 types. The clamp and screw terminal secures the cable without requiring a separate crimp fitting.
What mounting depth is needed?
A minimum 35mm back box depth is required behind the grid plate. The module itself recesses 30mm into the mounting box when installed.
Is it suitable for satellite connections?
The module is described as a TV aerial outlet and is screened to EN 50083-2. For satellite F-type connections, check whether Knightsbridge offers a dedicated satellite module in the same grid range.
Can it be used in bathrooms?
No. The IP20 rating confirms the module is designed for dry indoor locations only and is not protected against moisture ingress.