Description
The SANSO LED is a round bulkhead light that draws 15W and pushes out 1250 lumens of crisp 4000K white through a wide 120 degree spread. Across the Atlantic this style of fitting tends to be called an outdoor wall sconce or wall pack, and the SANSO covers the same ground with its sealed polycarbonate body and even, glare-free output. The diffuser softens the LED behind it so the light spills broadly rather than spotlighting, which is exactly what a doorway or passageway wants. At Ø250mm and just 50mm deep it sits close to the surface, whether that surface is a wall or a ceiling.
Its IP44 splash rating makes the SANSO a good fit for covered and sheltered spots: a porch, a carport, an external doorway under an overhang, or a stairwell and hallway indoors. It also suits bathroom zones away from direct spray. The 120 degree beam and 1250 lumen output give a generous wash of light rather than a tight pool, so it reads well as marker and circulation lighting over a path, threshold or utility corner. Think of it lighting the immediate area around an entrance or along a sheltered walkway rather than flooding an open garden, and mount it at a normal door-head or eaves height for the most even throw.
The housing is moulded polycarbonate in a clean white finish, which shrugs off knocks and weathers well in sheltered positions. The fitting is non-dimmable and runs straight off 220-240V AC mains, with an integrated LED rated to 15,000 hours so there is no bulb to replace. Mounting is surface-fixed and works equally on a wall or a ceiling, making it flexible for soffits and low covered areas. Wipe the diffuser occasionally to keep the output bright. The SANSO LED sits within our wider range of Kanlux bulkheads if you need matching fittings across several entrances.
Specification
| Power |
15W |
| Voltage |
220-240 AC |
| Luminous flux |
1250 lm |
| Efficiency |
83 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP44 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
15,000 hours |
| Shape |
Round |
| Dimensions |
Ø250 × 50 mm |
| Weight |
520 g |
| Material |
Polycarbonate |
| Finish |
White |
Downloads
Frequently Asked
Can the SANSO be used outdoors?
Yes, in sheltered and covered positions. Its IP44 rating handles splashing and damp, so it is well suited to a porch, carport or external doorway under an overhang. Keep it clear of fully exposed spots that take direct rain or hose jets, as that exceeds an IP44 rating.
Does it come with a bulb, and is it dimmable?
There is no separate bulb to fit. The SANSO uses an integrated LED rated to 15,000 hours, drawing 15W for 1250 lumens at 4000K. It is not dimmable and runs directly from 220-240V AC mains.
Where does this bulkhead typically get used?
It works as entrance, stairwell, hallway and utility lighting, and on sheltered exteriors like porches and covered walkways. The wide 120 degree beam gives a broad, even wash rather than a tight beam, which suits circulation areas and thresholds.
How do I clean and maintain it?
Wipe the polycarbonate diffuser with a soft, damp cloth to clear dust and grime, which keeps the 1250 lumen output looking bright. Avoid harsh solvents that could mark the white finish. Make sure the fitting is off and cool before cleaning.