Salvio LED Square Ceramic Semi-Flush Ceiling Light 4200K 3W - White

The Salvio is a 165mm square ceramic semi-flush ceiling light with an integrated 3W LED emitting 250 lumens at 4200K cool white. The square ceramic frame is finished in matte white, with a polished chrome circular recessed centre that houses the LED module and provides a contrast trim around the light source.

Designed for hallways, bathrooms, cloakrooms and utility spaces where a compact semi-flush fitting is needed for ceilings with limited void depth, the Salvio projects 170mm from the ceiling and requires a 60mm cut-out. The 4200K cool white colour temperature suits task-oriented spaces where clarity is needed rather than warm ambient light. The non-dimmable LED runs on 100-240V mains voltage and draws just 3W, making it a low-energy option for zones that need light left on for extended periods.

The white ceramic frame creates a clean geometric profile that sits flush against white ceilings without creating a visual break, while the polished chrome centre adds definition to the fitting when viewed from below. At 0.58kg the light is lightweight enough to fit onto standard plasterboard ceilings with appropriate fixings. The integrated LED means no bulb replacement is required over the expected lifespan of the module, and the fitting carries a 3-year warranty from Diyas.

Is the Salvio suitable for bathroom use?

The Salvio carries no stated IP rating in the specification table, which means it is not certified for use in bathroom zones requiring water protection. It is suitable for hallways, cloakrooms and utility rooms with standard residential moisture levels.

Can the LED be dimmed?

No. The integrated LED module is not dimmable and runs at a fixed 250 lumen output when powered on.

What is the light output compared to a traditional bulb?

The 250 lumen output at 3W is comparable to a traditional 25W incandescent bulb. This level of output suits small secondary spaces like hallways, en-suites and cloakrooms rather than primary living areas.

How is the fitting installed?

The Salvio requires a 60mm cut-out in the ceiling and is wired into the mains on 100-240V. At 0.58kg it can be fitted onto standard plasterboard with appropriate fixings. The 170mm projection from the ceiling means it needs at least 180mm of clearance below the ceiling once fitted.