Description
The Ruka is an outdoor LED wall light with an integrated PIR motion sensor, combining an anthracite powder-coated metal frame with a walnut-effect acrylic panel. The integrated 15W LED produces 900 lumens at 3000K warm white through an acrylic diffuser positioned beneath the top hood, projecting light downwards and outwards across the walnut panel at a 110° beam angle.
Designed for exterior walls near doorways, side passages, garden gates and garage entrances, the PIR sensor detects motion within its field and triggers the LED automatically. The sensor can be adjusted for detection range and time duration on installation, allowing the light to stay on for 10 seconds to several minutes depending on preference. The IP54 rating protects the internal components against dust ingress and water splashing from any direction, making the fitting suitable for exposed positions under eaves or soffit-mounted locations.
The walnut-effect panel sits within the anthracite frame as a decorative face, with the PIR sensor lens mounted centrally through the panel. The wood-grain print on the acrylic gives a natural material appearance without the maintenance requirements of real timber. The anthracite finish provides a dark neutral tone that works with brick, render, stone cladding and painted timber exteriors. The compact 182mm x 114mm face plate and 132mm projection suit narrow wall sections where a larger fitting would overwhelm the available space.
The Ruka runs on 100-240V mains voltage, making it compatible with UK and international supply standards without needing a transformer. The non-dimmable LED has a rated lifespan typical of integrated LED outdoor fittings, and the entire unit is backed by a 3-year warranty from Mantra.
Specification
| Colour Finish 1 |
Anthracite |
| Colour Finish 2 |
Walnut |
| Length |
182mm |
| Height |
114mm |
| Projection |
132mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
110° |
| Lumen |
900lm |
| Power Consumption |
15W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Weight |
1.28KG |
| Warranty |
3 Year |
Frequently Asked
What does the IP54 rating mean for outdoor use?
IP54 means the fitting is protected against dust ingress and water splashing from any direction. It is suitable for exterior walls under eaves, soffit-mounted positions, and covered porches. It is not rated for full immersion or direct heavy rain exposure without overhead protection.
Can the PIR sensor be adjusted?
Yes. The sensor typically allows adjustment for detection range and time duration on installation. Settings vary by unit but usually permit the light to stay on for between 10 seconds and several minutes after detecting motion, and detection range can be reduced if needed to avoid triggering from passing traffic or neighbours' property.
Is the walnut panel real timber?
No. The walnut-effect panel is acrylic with a printed wood-grain finish. This gives the appearance of natural timber without the weathering, warping or maintenance requirements of real wood in an outdoor environment.
Can the LED be replaced?
The LED is integrated into the fitting and is not user-replaceable. The LED is rated for a typical lifespan of 20,000-25,000 hours. If the LED fails within the 3-year warranty period, contact Mantra or Niori for warranty support.