Description
A small round recessed light with the LED built in behind a white bezel, drawing 8W and putting out 720 lumens in a fairly tight beam. A switch on the unit picks the colour of the light: extra warm, warm or cool white, so the same fitting suits a sitting room, a kitchen or a work area without you having to order different stock. The driver is supplied with it. Dimming is not part of the design, so it wants a plain on-off switch rather than a trailing edge one.
The 55mm cut-out keeps the ceiling looking quiet, and the narrow beam gives a defined pool of light rather than a general wash, which is why we use these over worktops, along a hallway, above a shower area or in a shallow ceiling void where a deeper fitting would not go. The body is sealed against water and steam, so bathrooms, wet rooms and utility rooms are all fair game. Colour rendering is high, so skin tones and paint colours hold up under it.
The white finish is flat and low key against a painted ceiling, and the bezel sits close so it reads as part of the plaster rather than an object stuck to it. To clean, turn the circuit off, let the fitting go cold and take a barely damp cloth around the rim, then dry it; nothing abrasive and no solvents near the lens. It carries a three year warranty. We stock the same downlight in black, and there is a larger, brighter version in both white and black if you want fewer points spaced further apart. As the LED is integrated, there is nothing to buy separately and nothing to replace along the way.
Specification
| Colour |
White |
| Recessable |
Yes |
| Weight |
0.20KG |
| Diameter |
65mm |
| Height |
64mm |
| Cut Out |
55mm |
| Materials Used |
Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
A+ |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 8W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700/3000/4000K Extra Warm/Warm/Cool White (±5%) |
| Number of Switching Cycles |
10000 |
| Average Life of LED |
25000hrs |
| LED Brand |
Bridgelux |
| LED Power |
8W (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
90lm/W (±5%) |
| Beam Angle |
36° |
| System Flux |
720lm (±5%) |
| CRI |
=90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver Required |
Integrated |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
8W (±5%) |
| Input Voltage |
200-240V~ 50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65/IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
The cut-out is 55mm. The visible bezel measures 65mm across, so it covers the aperture with a small margin all round.
How deep is the fitting?
The body stands 64mm tall, which makes it a useful option where the void above the ceiling is shallow.
Can I change the colour of the light?
Yes. A selector on the fitting gives 2700K extra warm white, 3000K warm white or 4000K cool white, so you can match it to the room before it goes up.
Is it dimmable?
No, this one is a fixed output fitting. If you want dimming in the same look, choose a dimmable downlight rather than trying to run this on a dimmer switch.
Is it suitable for a bathroom?
Yes. It is rated IP65 against water and steam, which covers bathrooms, wet rooms and shower areas.
How long should the LED last?
It is rated at 30,000 hours of average life, and the driver is included with the fitting.