Description
The Reka is a compact square outdoor wall light that casts light both upward and downward from a single wall-mounted body. It draws 7W to deliver up to 360 lumens of 4000K cool white through a roughly 90 degree beam, throwing two soft fans of light across the wall above and below the fitting. In the United States this style sits within the outdoor wall sconce family, though here it works as a neat up down wall light rather than a bulky façade floodlight. The 100x100 form keeps it discreet against brick, render or cladding.
Mounted beside a front door, on a porch, in a carport or along a covered passage, the Reka grazes the wall surface to mark an entrance and pick out texture in the brickwork. Coverage is directional rather than broad: expect two defined vertical washes near the fitting rather than wide area light, so several units spaced along a wall front build an even rhythm of light. With its IP54 rating it suits sheltered and splash-exposed positions such as entrances and covered outdoor spots, and it is best kept clear of fully exposed locations facing direct driving rain or hose jets. A typical mounting height around head level keeps the up and down effect balanced.
The body is aluminium alloy in an anthracite finish, built to hold up in damp outdoor conditions while staying low profile on the wall. It runs on 220-240V AC mains with an integrated LED rated to 30,000 hours, so there is no separate bulb to replace, and the fitting is not dimmable. Mounting is a straightforward fixed wall installation through the rear plate, and the square 100 x 100 x 100 mm shape weighs just 560 g. The Reka sits within a wider Reka outdoor wall range if you need matching fittings across a frontage.
Specification
| Power |
7W |
| Voltage |
220-240 AC |
| Luminous flux |
360 lm |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
90° |
| IP rating |
IP54 |
| Dimmable |
No |
| Mounting |
Wall Mounted |
| Lifespan |
30,000 hours |
| Shape |
Square |
| Dimensions |
100 × 100 × 100 mm |
| Weight |
560 g |
| Material |
Aluminium Alloy |
| Finish |
Anthracite |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Can the Reka be used outdoors?
Yes, it carries an IP54 rating, which makes it splash-resistant and suitable for sheltered outdoor positions such as porches, carports and covered entrances. Keep it out of fully exposed spots that face direct driving rain or hose jets. Indoors it also works well in damp areas like utility or bathroom zones away from direct water.
How does the up and down light effect work?
Light leaves the fitting from both the top and bottom, throwing two soft fans of light up and down the wall. This grazes the surface and highlights texture in brick or render rather than lighting a wide area. The square body keeps the effect tidy and symmetrical.
Does it need a separate bulb?
No, the Reka uses an integrated LED rated to 30,000 hours, so there is no bulb to fit or replace. It runs directly from a 220-240V AC mains supply at 7W and gives up to 360 lumens of 4000K cool white light. Note that it is not dimmable.
How do I clean the fitting?
Wipe the anthracite aluminium body with a soft, slightly damp cloth and avoid abrasive cleaners that could mark the finish. Make sure the power is off and the fitting is cool first. An occasional clean keeps the light output clear and the finish looking even.