Pulcra Tube Flush Ceiling Light - Matt Black

The Pulcra is a surface-mounted cylindrical ceiling light finished in matt black, built around a single GU10 lamp holder housed within a 6cm diameter metal tube. The fitting projects vertically downwards from the ceiling rather than recessing into it, casting a focused downward beam from the GU10 reflector lamp inside. Available in four tube lengths, the same diameter is maintained across the range so multiple drops can be paired without visual mismatch.

The narrow beam and downward-only output make the Pulcra a directional task or accent light rather than a general ambient fitting. It suits use over kitchen islands, breakfast bars, console tables, hallway feature walls, and stairwells where a tight pool of light is needed below the fixture. Because it surface-mounts rather than recesses, it can be installed on solid ceilings without cutting into the void above, which is useful in concrete soffits, exposed-beam ceilings and rented spaces.

The 6cm diameter keeps the tube visually quiet on the ceiling, while the matt black finish absorbs reflections and reads as a clean dark line against white or pale plaster. Mixing the four available lengths across a single ceiling creates a staggered arrangement that works well above long dining tables, kitchen islands and reception counters. The metal body carries a 2-year warranty and accepts any standard GU10 lamp, sold separately.

What bulb does the Pulcra take?

The fitting takes a single GU10 lamp (sold separately). Most users pair it with a GU10 LED in a 36-degree beam angle and 2700K-3000K colour temperature for warm directional light, though wider beam angles and cooler colour temperatures are available depending on the application.

How many tube lengths are available?

The Pulcra is offered in four lengths, all sharing the same 6cm diameter. Mixing lengths across one ceiling creates a staggered cluster effect, which works well above long dining tables and kitchen islands. Each length is purchased as a separate fitting.

Is it suitable for low ceilings?

The shorter tube versions suit standard 2.4m ceilings without intruding into head height. The longer tube lengths drop further into the room and are better suited to ceilings of 2.7m or higher, or to positions over surfaces such as kitchen islands and dining tables where the drop sits above seated head height.

Can it be used in a bathroom?

No IP rating is listed for this fitting, so it should be installed in dry interior locations only and not within bathroom zones. For zoned bathroom locations, choose a fitting with a stated IP44 or IP65 rating.