Description
The Pesvette Downlight Set of 5 gives you five round recessed ceiling downlights in a brushed satin nickel finish, each 9cm in diameter. The body is plastic, coloured satin nickel, and the inner ring tilts so you can angle the light towards a picture, a worktop or a favourite chair. Each fitting takes a GU10 bulb of up to 5W, and the bulbs are not included, so you can pick the ones that suit the room. The IP20 rating settles where they belong: indoors, in dry rooms, and never in a bathroom or outside.
Because they sit neatly into the ceiling with only a slim trim showing, a set of five suits a living room, a kitchen, a hallway or a bedroom where you want light without anything hanging down. The tilting heads are the reason we like them: point one at artwork on a wall, another at a bookcase, and the rest straight down for general light. Buying five together means a whole room matches, with one satin nickel finish across the ceiling, and that soft metallic tone sits comfortably beside white paintwork, pale wood or brushed steel handles.
Each downlight fits a cut-out 6.8cm across and needs a recess depth of just 2.5cm, which makes the set a good choice where the void above the ceiling is shallow. They run on 220-240V, 50/60Hz mains and have no switch of their own, so you control them from the wall switch. As wired-in fittings, they are installed by a qualified electrician, and the installation instructions are available as a download. The set weighs 0.391KG packed. Before fitting day, pick up five GU10 bulbs of up to 5W each so every downlight is ready to glow.
Specification
| Diameter |
9cm |
| Body Material |
Plastic |
| Body Colour |
Satin nickel |
| Light Source |
GU10 (bulb not included) |
| Wattage |
Max 5 x 5W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Recess Depth |
2.5cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.391KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can these downlights go in a bathroom?
No. They are rated IP20, which suits dry rooms indoors only, so we would keep them out of bathrooms, wet areas and anywhere outside.
Which bulbs do they take?
Each fitting takes a GU10 bulb of up to 5W. The bulbs are not included, so you will need five of them for the full set.
What size hole does each downlight need?
Each one needs a cut-out 6.8cm across and a recess depth of 2.5cm, and the fitting itself measures 9cm in diameter.
Can the downlights be angled?
Yes. The inner ring tilts, so you can aim each light at a picture, a shelf or a worktop rather than only pointing straight at the floor.
How are the downlights switched?
They have no switch of their own and are switched at the wall, so they work from an ordinary wall switch in the room.
What material is the body?
The body is plastic, finished in a satin nickel colour that gives a soft, brushed metallic look across the ceiling.