Description
The Pesvette is a round recessed downlight that sits almost flush with the ceiling, leaving only a slim satin nickel bezel 9cm across in view. The body is plastic, finished in a brushed satin nickel colour, and the inner ring tilts so you can angle the beam towards a picture, a shelf or a favourite chair. It takes a GU10 lamp of up to 5W, which is not included, so you choose the colour of light and the brightness that suit the room. The rating is IP20, which settles where it belongs: indoors, in dry rooms, away from water and steam.
Because the bezel stays small and quiet, a row of these suits hallways, landings, living rooms and bedrooms where you want light from the ceiling without a pendant in the way. The tilting ring is the useful part: it lets you wash a wall, pick out artwork or put light over a dining table rather than straight down at the floor. The satin nickel finish is a soft grey metallic that sits comfortably beside brushed steel handles, chrome switches and white or pale ceilings. Choosing your own GU10 lamp also means a spent one is a quick swap, never a new fitting.
Being plastic, the body is light, at 0.116KG packed, and the spring clips hold it snugly against the ceiling once it is pushed home. It runs from 220-240V mains and has no switch of its own, so it is switched at the wall like any ceiling light. As a wired mains light, it is installed by a qualified electrician, and the installation instructions come as a PDF download. Before ordering, check that your ceiling holes are 6.8cm across and that there is at least 2.5cm of clear depth above them, which suits even shallow ceiling voids.
Specification
| Diameter |
9cm |
| Body Material |
Plastic |
| Body Colour |
Satin nickel |
| Light Source |
GU10 (bulb not included) |
| Wattage |
Max 5W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Recess Depth |
2.5cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.116KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can I fit the Pesvette downlight in a bathroom?
No, we would keep it out of bathrooms. It is rated IP20, which means indoors and dry rooms only, away from water and steam.
Is a bulb included?
No, the bulb is not included. It takes a GU10 lamp of up to 5W, so you can choose the colour and brightness of light you prefer.
What size hole does it need?
It needs a cut-out 6.8cm across and 2.5cm of recess depth above the ceiling, while the satin nickel bezel itself measures 9cm across.
Can the light be angled?
Yes, the inner ring tilts, so you can direct the beam towards a picture, a wall or a table rather than straight down at the floor.
What material is the downlight?
The body is plastic with a brushed satin nickel colour, which keeps it light at 0.116KG packed and gives a soft grey metallic look.
How is it switched?
It has no switch of its own. It runs from 220-240V mains and is switched at the wall like any other ceiling light.