Description
The Pesvette is a round recessed downlight with a black plastic body and a slim black trim 9cm in diameter. Its inner ring tilts, so instead of lighting only the floor beneath it, it lets you aim the beam towards the part of the room that matters. It takes a GU10 bulb of up to 5W, and the bulb is not included, which leaves you free to pick the colour temperature and beam you prefer. The IP20 rating settles where it belongs: this is a fitting for indoor, dry rooms.
We would put it in living rooms, hallways, bedrooms, studies and kitchens, anywhere you want light from the ceiling without a pendant or a shade in the way. The tilting ring is the real gain: angle it towards a framed print, a shelf of books or a textured wall and the ceiling stays clean while the light does the work. A run of them along a hallway or across a kitchen ceiling gives a tidy, modern look, and the black trim stands out neatly against a white or pale ceiling. Because it is rated IP20, keep it away from bathrooms, shower rooms and anywhere outdoors.
The body is plastic, a light material that keeps the downlight easy to handle, and it weighs 0.122KG packed. Spring clips either side hold it against the ceiling once it is in place. It needs a ceiling cut-out of 6.8cm and a recess depth of 2.5cm, and it runs on 220-240V mains at 50/60Hz. There is no switch on the downlight itself; it is switched at the wall. As a mains fitting it should be installed by a qualified electrician, and the installation instructions are available as a download. Before you order, measure the space above your ceiling and check that a 5W GU10 bulb suits the room you have in mind.
Specification
| Diameter |
9cm |
| Body Material |
Plastic |
| Body Colour |
Black |
| Light Source |
GU10 (bulb not included) |
| Wattage |
Max 5W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Recess Depth |
2.5cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.122KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Pesvette downlight go in a bathroom?
No. It is rated IP20, which means indoor, dry rooms only, so keep it away from bathrooms, showers and outdoor spaces.
What size ceiling hole does it need?
It needs a cut-out of 6.8cm and a recess depth of 2.5cm, and the black trim is 9cm in diameter.
Which bulb does it take?
It takes a GU10 bulb of up to 5W. The bulb is not included, so you can choose the colour of light you prefer.
Can the light be angled?
Yes. The inner ring tilts, so you can aim the beam towards a picture, a shelf or a wall rather than only the floor.
Does it have its own switch?
No. There is no switch on the downlight itself; it is switched at the wall, so you control it from a wall switch.
What material is the body?
The body is plastic in a black finish, which keeps the downlight light and easy to handle, at 0.122KG packed.