Description
Nine lampholders spread across a wide circle, so the light falls in a broad, even pool rather than a single hard spot. The weathered zinc finish is soft and grey with an aged look to it, lifted by brushed nickel detail. The drop adjusts over a generous span, so the fitting can hang well clear in a tall room or come down close over a table. At 70cm across, this is the largest of the Parker pendants and wants a little room around it to be seen properly.
We would reach for it over a long dining table, in a stairwell with height to fill, or in a wide open kitchen where a smaller pendant would look lost. Because the lamps are on show, the shape you choose matters as much as the fitting itself: round LED globes give the familiar look, while squirrel cage and slim tubular lamps make more of the vertical. All of them take an E27 fitting. It will dim with compatible lamps and a suitable dimmer, neither of which comes with it.
Finish does much of the work here, and the aged zinc surface is meant to look a little worn from the start, so there is no need to chase an even sheen. Dust it with a dry lint free cloth, working around each lampholder in turn, and leave polishes and sprays alone, as they can flatten the character out of the metal. It is made for dry indoor rooms and a normal household supply, not for a bathroom or a covered porch. It carries a one year warranty. The same weathered zinc and brushed nickel pairing runs through the smaller pendants in the range and a matching wall light, which helps if you want a hall and a dining room to speak to each other. Lamps are not included.
Specification
| Colour |
Weathered Zinc |
| Second Colour |
Brushed Nickel |
| Handcrafted |
Yes |
| Weight |
6.40KG |
| Diameter |
700mm |
| Minimum Drop |
550mm |
| Maximum Drop |
1465mm |
| Body Height |
335mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Rod |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
9 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60, ST64, Tubular T45) |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Bracket Dimensions |
L:95mm, W:20mm |
| Shade Material |
Metal |
| Shade Shape |
Cylinder |
| Number of Shades |
1 |
| Pieces Included |
1 |
Frequently Asked
How far down will it hang?
The drop adjusts from 550mm to 1465mm, and the body itself is 335mm tall, so you can set it high in a tall room or bring it low over a table.
Which lamps should I fit?
It takes nine E27 lamps, up to 20W each. LED works well: a round GLS A60, a squirrel cage ST64 or a tubular T45 all suit the exposed holders.
Can it be dimmed?
Yes, provided you use dimmable lamps and a compatible dimmer. Neither the lamps nor a dimmer are supplied.
How heavy is the fitting?
It weighs 6.4kg net.
Is the brushed nickel a different version of the pendant?
No. Both finishes appear on this one fitting: weathered zinc with brushed nickel detail.
How wide is it in total?
The diameter is 700mm, so allow clear space either side when planning where it will sit.