ONTEC S 6.8W Maintained Self-Test Emergency Light - Surface IP65 - White

The ONTEC S is a surface-mounted LED emergency luminaire running 6.8W from a 220-240V AC supply and delivering 576 lumens at a crisp 5000K white. It works as an emergency led light, the term US specifiers also reach for when they search emergency light fittings, and runs in maintained mode so the same fitting provides everyday light and switches to its battery output the moment mains power fails. The 5000K tone keeps signage and floor markings clearly legible during an evacuation.

Built for escape routes, stairwells, corridors and plant rooms, the ONTEC S suits sites where the lighting has to keep working when everything else goes dark. Its IP65 rating means it holds up in exposed outdoor and wet locations, so loading bays, covered car parks and damp utility areas are all within scope. Rather than lighting a room to a set lux level, an emergency fitting marks the way out, so position it to throw light across the escape path, above exit doors and at changes of level where people need to see their footing.

The housing is white plastic and surface-mounts to a wall or ceiling, making it straightforward to retrofit without recessing into the structure. The IP65 seal keeps moisture and dust out of the gear and battery. A built-in self-test routine runs the duration and function checks automatically, which cuts down the manual testing burden across a large installation and flags faults before an inspection. The ONTEC S sits within the wider Ontec emergency range, which includes further wattage and mounting options for matching a scheme across a building.

Is this a maintained or non-maintained emergency light?

The ONTEC S is a maintained fitting, meaning it provides normal illumination during everyday use and continues to light from its internal battery if the mains supply fails. This makes it suited to areas that need general light as well as emergency cover, such as corridors and stairwells.

Can it be used outdoors or in wet areas?

Yes. Its IP65 rating makes it weatherproof and suitable for exposed outdoor and wet locations, including covered car parks, loading bays and damp plant rooms. The sealed plastic housing keeps dust and moisture away from the battery and gear.

How does the self-test feature work?

The ONTEC S runs automatic self-test routines that check both function and battery duration without anyone needing to trigger them manually. This reduces the maintenance workload on larger sites and helps flag any fault ahead of a scheduled inspection.

How do I clean the fitting?

Wipe the white plastic housing with a soft, dry or slightly damp cloth, with the supply isolated first. Avoid solvents or abrasive cleaners, which can mar the surface and the seal. Keeping the lens clear helps maintain the 576 lumen output along the escape route.