Description
This Omera LED driver is the compact power unit that sits between your mains supply and an LED light source. It turns 220 to 240 volts AC at 50 or 60Hz into a steady 1000mA constant current, at up to 45W. It is a neat white rectangular box, 106mm long, 69mm wide and 28mm high, and it weighs just 0.17KG, so it is a small, light unit to place. Slotted vents run along its sides, and a separate cover section closes off one end. What you receive is the driver itself, ready to pair with a light source that matches its output.
Choosing a constant current driver is a matter of matching. This one suits an LED source designed to run at 1000mA and draw no more than 45W, so check those two figures on your module first. Its two dimming options are what make it so useful. DALI links it to a digital lighting control system, so a whole scheme can be dimmed from a central controller. Push dimming lets a momentary push-button switch brighten and dim the light with no separate dimmer needed. It works just as well in a simple setup as in a fully controlled scheme.
The constant current design holds the output at a fixed 1000mA, which is exactly what an LED source rated for that current needs. The driver runs in surrounding temperatures from 0°C to 40°C, so choose a spot where the air stays within that range: a ventilated space suits it better than a hot, sealed corner. As a mains product, it is installed by a qualified electrician. Before you order, note the current and wattage of your LED source. If they read 1000mA and 45W or less, this driver is the right match.
Specification
| Length |
106mm |
| Width |
69mm |
| Height |
28mm |
| Output |
1000mA Constant Current, up to 45W |
| Input Voltage |
220-240V AC, 50/60Hz |
| Dimming |
DALI & Push |
| Operating Temperature |
0°C to 40°C |
| Certification |
CE |
| Weight |
0.17KG |
| Warranty |
5 Years |
Frequently Asked
What does DALI & Push dimming mean on this driver?
It can be dimmed in two ways: through a DALI digital lighting control system, or from a momentary push-button switch without a separate dimmer.
Which LED light sources will this driver power?
It suits an LED source designed for a constant current of 1000mA that draws no more than 45W, so check both figures on your source before ordering.
What size is the Omera LED driver?
It measures 106mm long, 69mm wide and 28mm high, and it weighs 0.17KG, so it is a small, light unit.
What mains voltage does the driver need?
It takes a 220 to 240 volt AC supply at 50 or 60Hz, which covers the standard UK mains supply.
What operating temperature range does the driver allow?
It is designed to run where the surrounding air stays between 0°C and 40°C, so avoid hot, sealed spaces when choosing its position.