Description
The Nur is a semi-flush LED ceiling light built around a single curved arm that loops outward from a circular brown oxide ceiling plate. The arm is wrapped in a frosted white diffuser that houses two integrated LED strips, casting 4000 lumens of warm 2800K light along the full length of the curve. The brown oxide finish on the metalwork contrasts with the frosted white diffuser, and the loop creates a sculptural silhouette that projects approximately 640mm from the ceiling at its furthest point.
Designed for living rooms, dining areas, bedrooms and entrance halls with standard ceiling heights of 2.4m or above, the Nur provides ambient rather than task lighting. The 530mm diameter ceiling plate fits standard UK ceiling roses, and the semi-flush format positions the fitting close enough to the ceiling to avoid overwhelming rooms with lower ceilings. The dimmable LED system allows the light level to be adjusted from full 4000lm output down to a softer evening setting, requiring a compatible trailing-edge LED dimmer on the circuit.
The frosted diffuser turns the LED strips into a continuous ribbon of light rather than visible point sources, and the 120-degree beam angle means the light spreads across ceilings and upper walls rather than concentrating downward. The brown oxide finish is a warm dark brown with a textured metallic surface that absorbs rather than reflects light, allowing the illuminated curve to remain the focal point. The entire fitting weighs 1.57kg and is rated for worldwide voltage (100-240V).
The 3 year warranty covers the integrated LED system.
Specification
| Colour Finish 1 |
Brown Oxide |
| Colour Finish 2 |
Frosted White |
| Diameter |
530mm |
| Height |
640mm |
| Number Of Bulbs |
2 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
2800K Warm White |
| Beam Angle |
120° |
| Lumen |
4000lm |
| Power Consumption |
50W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Weight |
1.57KG |
| Warranty |
3 Year |
Frequently Asked
Is the Nur dimmable?
Yes. The integrated LED is dimmable but requires a compatible trailing-edge LED dimmer installed on the lighting circuit. Standard rotary dimmers designed for incandescent bulbs may cause flickering or buzzing.
What ceiling height is needed?
The fitting projects 640mm from the ceiling at its furthest point. Ceiling heights of 2.4m or above are recommended to maintain comfortable headroom clearance, especially in rooms where people walk beneath the fitting.
Can the light output be adjusted?
Yes. With a compatible dimmer the output can be adjusted from full 4000lm brightness down to a softer ambient level. The 2800K colour temperature remains constant across the dimming range.
What is the brown oxide finish?
Brown oxide is a warm dark brown metallic finish with a textured surface. It is not glossy or reflective, and sits somewhere between bronze and rust-brown in tone. The finish pairs with warm-toned interiors and provides contrast against the frosted white diffuser.