Molly 3 Tier LED Circular Chandelier - Chrome with Remote Control

The Molly is a 3-tier circular chandelier built around three interwoven chrome-plated aluminium rings descending in tiers from a shared ceiling canopy. Each ring carries integrated LED strips behind opal silicone diffusers, producing 138W total output at 3000K across the three tiers. The chrome finish is high-gloss polished, and the rings sit at different diameters creating a cascading sculptural form when viewed from below.

Designed for high-ceiling installations in entrance halls, stairwells, open-plan living spaces and commercial reception areas, the Molly requires a minimum ceiling height of 2.6m to accommodate the 130cm minimum drop, and can be extended to 340cm on the adjustable cables where ceiling heights allow. The suspension cables are individually adjustable on installation, so the three tiers can be set at equal spacing or staggered to suit the proportions of the room. The fitting weighs 7.4kg and uses gravity toggles for secure ceiling mounting on plasterboard or solid ceilings.

The integrated LED is dimmable via TRIAC and 0-10V protocols, and the fitting includes a dimmer set and RF remote control in the box. The remote allows brightness adjustment without requiring a wall-mounted dimmer switch, which is useful in stairwells or rooms where a dimmer would be impractical to install. The opal diffusers soften the LED output to prevent glare when the fitting is viewed from below, and the CRI rating above 80 provides good colour rendering for residential and hospitality interiors.

The 110cm widest ring diameter makes this a substantial piece suited to rooms with floor areas of 20m² or larger. In smaller spaces the scale can overwhelm; in larger volumes the three-tier structure fills vertical space and creates a focal point visible from multiple levels in split-level or mezzanine layouts. IP20 rating restricts use to dry indoor areas only.

Product Specification Sheet

Is the Molly dimmable?

Yes. The integrated LED is dimmable via TRIAC and 0-10V protocols. The fitting includes a dimmer set and RF remote control in the box, allowing brightness adjustment without needing a separate wall-mounted dimmer switch.

What ceiling height is needed?

The minimum drop is 130cm, so a ceiling height of at least 2.6m is required to avoid the lowest ring hanging too low. The maximum adjustable drop is 340cm, which suits double-height spaces, stairwells and commercial atriums.

Can the drop height be adjusted after installation?

The suspension cables are individually adjustable during installation. Once the fitting is hung and the canopy secured, further adjustment requires lowering the fitting and re-threading the cables, so it's best to set the desired drop height during the initial fitting.

What room size does this suit?

The 110cm widest ring diameter suits rooms with floor areas of 20m² or larger. In smaller rooms the scale can dominate; in entrance halls, open-plan living areas and stairwells with higher ceilings the three-tier structure fills vertical space effectively.