Description
The Milo 7040T is a compact bulkhead wall light that takes a single E27 lamp rated up to 25W, running on a standard 220-240V AC supply. Its rounded body throws a soft, even wash rather than a tight beam, so light spreads gently across the surface it sits on. American buyers will recognise the format as an outdoor wall pack or wall sconce, a familiar shape for doorways and utility walls. With an E27 cap and compatibility across GLS, CFL and LED bulbs, the output and colour tone follow whichever lamp is fitted.
The 7040T suits sheltered and splash-prone spots: a covered porch, a carport, a side passage or an entrance canopy, as well as bathroom zones where occasional moisture is expected. At the IP44 rating it is built for splash and spray, not for fully-exposed positions, direct water jets or submersion, so keep it under cover outdoors. Coverage is broad and ambient rather than directional, marking a doorway or washing a small wall area, which makes it a practical choice beside doors, in stairwells and along sheltered walkways at typical wall-mounting heights.
The housing is moulded plastic in a grey finish, with an IP44 rating against splashes and an IK06 impact rating for everyday knocks. It mounts to a wall or a ceiling and measures 165 by 100 by 110 mm, weighing 420 g. There is no integrated driver or transformer, since it runs direct from mains and accepts a standard E27 bulb of your choice. The Milo range includes further bulkhead options in matching styling for grouping across a building.
Specification
| Power |
max 25W |
| Voltage |
220-240 AC |
| IP rating |
IP44 |
| IK rating |
IK06 |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Cap / base |
E27 |
| Light source |
GLS/CFL/LED |
| Shape |
Other |
| Dimensions |
165 × 100 × 110 mm |
| Weight |
420 g |
| Material |
Plastic |
| Finish |
Grey |
Downloads
Frequently Asked
Can it be used outdoors?
Yes, in sheltered positions. The IP44 rating handles splashes and spray, so it is fine under a porch, carport or canopy. Keep it out of fully-exposed spots and away from direct water jets, as it is not rated for those conditions.
Is a bulb included?
No bulb is supplied. The fitting takes a single E27 (ES) lamp rated up to 25W, and it accepts GLS, CFL or LED types, so you can choose the brightness and colour tone that suits the location.
Where is this bulkhead typically used?
It works well by doorways, in stairwells, porches, carports and along sheltered walkways. Its even, ambient spread also makes it suitable for bathroom zones where some moisture is expected, given the IP44 rating.
How do I clean and maintain it?
Wipe the grey plastic housing with a soft, damp cloth and avoid abrasive cleaners that could mark the surface. Switch off the supply before removing the cover to change the E27 bulb or clear any dust from inside.