Description
A small round recessed light with a matt white face and a plain flush rim, made to sit quietly in a ceiling rather than draw the eye. It drops into an 80mm cut-out, and the integrated LED runs at 7W with a warm 3000K colour and a wide spread, so light falls evenly rather than in hard pools. The driver is supplied with it. There is no dimming: it works as a straightforward on and off fitting, which keeps the wiring simple and the light output consistent every time it is switched.
We reach for fittings like this where a room wants even background light and nothing hanging down: kitchen ceilings, hallways, landings and utility rooms. It is sealed against splashes and dust as well, so it suits a bathroom or a shower room where a plainer face is welcome. Run in a line or a loose grid, it gives steady light for cooking, washing and moving about at night, and the small face keeps a ceiling looking calm. We would choose it in a low room, where a pendant would only be in the way.
The face is matt rather than glossy, and white lets it read as part of the ceiling once the paint is around it. To clean, switch it off first and wipe the rim with a barely damp cloth, then dry it; solvents and cream cleaners will dull a matt white finish, so leave them in the cupboard. The LED is integral, so there is no lamp to swap out over its life. It carries a three year warranty. The same downlight is also offered in a cooler white for kitchens and bathrooms where a crisper light is preferred, and the two mix badly, so we would keep one temperature per room.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.23KG |
| Diameter |
92mm |
| Height |
38mm |
| Cut Out |
D:80mm |
| Materials Used |
Aluminium, Acrylic |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
20000hrs |
| LED Brand |
Osram |
| Qty of SMD |
6 |
| SMD Chipset |
3030 |
| LED Power |
1.2W (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle |
120° |
| System Flux |
490lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output |
350mA |
| Min/Max. Voltage Output |
220-240V |
| Load Range |
7W |
| Ta |
25°C |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Average Life |
20000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
A round 80mm cut-out. The visible face measures 92mm across, so the trim covers a little beyond the opening, and the body stands 38mm deep.
Can it be dimmed?
No. It is a non-dimmable fitting, so pair it with a standard switch rather than a dimmer plate.
Is it suitable for a bathroom?
Yes. It is rated for protection against dust and splashing water, which covers normal bathroom and shower room ceiling use.
What sort of light does it give?
A warm white at 3000K from a 7W integrated LED, with a broad 120 degree beam that washes a ceiling area rather than spotlighting.
Do I need a separate driver?
No, the driver is included with the fitting.
How long should the LED last?
It is rated at around 20,000 hours of use, and as the LED is integral there is no lamp to replace.