MARC Round E27 IP54 Bulkhead - White

The MARC is a round LED bulkhead that takes a single E27 bulb up to a maximum of 60W, running from a 220-240V AC supply. It accepts GLS, CFL or LED lamps, so the brightness and colour temperature follow whichever bulb you fit rather than being fixed by the fitting. American buyers will know this style as an outdoor wall sconce or wall pack, the compact circular housing that sits flush against the surface and casts a soft, even wash from its opal diffuser. At Ø244mm across and 105mm deep it keeps a low profile on the wall or ceiling.

Because the light output depends on the chosen E27 bulb, coverage is best judged by location rather than a fixed lux figure. The MARC works well as marker and amenity lighting around entrances, porches, stairwells, corridors and communal landings, where the diffused glow lights the immediate area and picks out a doorway or step. Its IP54 rating makes it splash-resistant and suited to sheltered outdoor positions such as a porch, carport or covered walkway, as well as damp interior spots. It is not intended for fully exposed sites that take direct rain or water jets, so keep it under cover where weather is a factor.

The housing is moulded in polycarbonate with a white finish, a durable choice that resists knocks and corrosion in utility and outdoor-adjacent settings. The fitting can be wall mounted or ceiling mounted, giving flexibility for entrances, soffits and porch ceilings alike, and the round opal diffuser clips over the lamp to soften the output and shield it from splashes. At 530g it is light enough for straightforward fixing to most surfaces. Dimming depends on the E27 bulb specified rather than the fitting itself.

Can the MARC be used outdoors?

It carries an IP54 rating, which makes it splash-resistant and suitable for sheltered outdoor positions such as a porch, carport or covered entrance. It should not be installed where it would face direct rain or water jets, so keep it under cover in exposed locations.

Is a bulb included?

No, the MARC takes a standard E27 (ES) bulb that you supply separately, up to a maximum of 60W. It accepts GLS, CFL or LED lamps, so you can choose the brightness and colour temperature that suits the space.

Where is this bulkhead typically used?

It suits entrances, porches, stairwells, corridors, communal landings and damp utility areas. The diffused output gives soft amenity lighting, and the option to wall or ceiling mount makes it versatile across these locations.

How do I clean the diffuser?

Switch off the supply and let any bulb cool, then wipe the round polycarbonate diffuser with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can dull or scratch the white finish over time.