Description
A small anthracite box for an outside wall, throwing light both upward and downward through opal white diffusers, so the wall itself does much of the work. The light is warm white at 3000K, close in colour to an old incandescent lamp, and the LED inside is integral, drawing 6W. What you get is two soft wedges of light, one climbing and one falling, rather than a single flat pool at your feet.
We reach for it beside front and back doors, along a side path, or on a porch wall where anything bulkier would crowd the space, and a pair either side of a door gives a tidy, balanced result. Because the openings are narrow, it marks a boundary or a step without glaring across into a neighbour's window. It is not dimmable and has no switch of its own, so it sits happily on a house switch or on whatever already controls the rest of your outside lighting. It suits plain, modern frontages, render, timber cladding and newer brick alike.
Depth front to back is modest, so it stays close to the wall and out of the way of a door swinging past. The body wears an anthracite finish and the diffusers are opal white, which keeps the lit look even rather than spotty. It is rated to cope with rain and windblown dust, as an outdoor fitting should be. Give it a wipe with a damp cloth once a season, clear cobwebs and leaf litter from the top and bottom openings, and check nothing has taken up residence behind it. It carries a three year warranty. We also stock the same fitting in sand white if your walls are pale, and there is no lamp to replace here, since the LED is built in.
Specification
| Colour |
Anthracite |
| Ceiling Mountable |
Yes |
| Weight |
0.50KG |
| Width |
120mm |
| Height |
140mm |
| Projection |
130mm |
| Materials Used |
Aluminium Die-Casting Body, Polycarbonate Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
350lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
7.5W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
How big is it on the wall?
It measures 120mm wide by 140mm high, with a projection of 130mm from the wall face, so it reads as a compact block rather than a lantern.
What colour is the light?
Warm white at 3000K, a soft yellow-toned light that flatters brick, render and timber and stays kind to the eye at night.
Can I dim it?
No. The integrated LED is non-dimmable, so pair it with a standard on/off switch or an external timer rather than a dimmer.
Is it weatherproof enough for an exposed wall?
It is IP54 rated, which covers rain and windblown dust in normal exposed positions on a house wall.
Does it need an earth?
Yes, it is a Class 1 fitting and requires an earth connection at the supply.
What finishes are available?
Two: this anthracite version and a sand white version, both otherwise identical.