Description
This is the power supply that sits behind a magnetic track run, taking the mains and holding a steady 48V for the fittings along it, with up to 320W available across the system. The output is fixed rather than dimming, so light levels stay where the fittings set them. The housing is a plain black rectangle, slim and low, close to 215mm end to end.
We would choose this one where a track run is long or busy: an open plan kitchen with spots over the island and the worktop, a hallway with a line of heads, a home office, or a landing where several fittings share one circuit. It suits anyone putting a magnetic track system together piece by piece, since the driver capacity is what decides how many heads a run will carry. We stock it in black, and it is the size we tend to specify when a smaller supply would be working near its limit.
The casing is finished in black throughout, unfussy and made to be tucked away rather than looked at, and the vented body keeps the working parts covered. Keep it somewhere dry and free of stored boxes or fabric so air can move around it, and when it needs attention, isolate the circuit first and lift dust from the housing with a dry brush or a clean cloth; nothing wet, and no solvents near the label. It carries a three year warranty. Elsewhere in the Magneto range we stock shallow, deep and recessed track in one metre lengths with end caps, L-joints for turning a run through a corner or wall to wall, and a separate Triac and push switch dimmable controller if you want the run to dim. Track and fittings are bought separately.
Specification
| Colour |
Black |
| Weight |
0.71KG |
| Length |
215mm |
| Width |
78mm |
| Height |
35mm |
| Materials Used |
Copper, Plastic |
| Total Power Consumption |
320W (±5%) |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What voltage and power does this driver supply?
It gives a constant 48V DC output with up to 320W available for the fittings connected to it.
Can I dim the lights using this driver?
No, this one is non-dimmable and holds a fixed output. For dimming, the Magneto Triac and push switch dimmable controller covers 12-48V, one per system up to 720W.
How big is it?
It measures 215mm long, 78mm wide and 35mm high, and weighs 0.71kg.
Is it suitable for a bathroom or outdoors?
No. It is rated IP20, so it belongs in dry indoor spaces only, away from splashes and damp.
How do I work out whether one driver is enough?
Add up the wattage of every fitting on the run and keep the total comfortably under 320W. If you go over, a second driver or a larger supply is needed.
How should I clean it?
Switch the circuit off at the consumer unit, then remove dust with a dry cloth or soft brush. Avoid water, sprays and solvents.