Description
Every low-voltage track run needs something feeding it, and this is the part that does that job from within the channel itself. It is a slim black bar, around 26cm long and narrow enough to sit down inside the profile, delivering 48V to the fittings along the run and handling up to 100W between them. Once the run is together, there is very little of it left to see.
It will suit anyone who is building a Magneto run in a kitchen, a hallway, a study or above a stair, where a line of small fittings is doing the lighting and nothing overhead should read as clutter. Because it lives inside the track, the run stays a clean black line from end cap to end cap. We reach for it whenever someone is specifying a Magneto system from scratch, and we always add up the load of the fittings on the run first so there is headroom left in the supply.
The finish is black, matched to the tracks, joints and end caps in the range so nothing breaks the line. Its place is dry indoor rooms, a kitchen or a living space rather than a bathroom or an open porch. Cleaning asks for nothing more than isolating the circuit and passing a dry cloth over the visible face, with sprays and solvents kept well away. It carries a three year warranty. Around it, the range runs to shallow surface track, deep surface and pendant track, a recessed version, L-joints for taking a run round a corner or across a wall, and a push-switch controller for putting the whole system on a dimmer.
Specification
| Colour |
Black |
| Weight |
0.40KG |
| Length |
255mm |
| Width |
22mm |
| Height |
47mm |
| Materials Used |
Copper, Plastic |
| Lamp Cap |
Not Applicable |
| CRI |
=80 |
| Total Power Consumption (W) |
100W (±5%) |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What voltage does it supply, and how much can it carry?
It feeds the track at 48V and will handle up to 100W of fittings across the run.
How much room does it take up inside the track?
It measures 255mm long, 22mm wide and 47mm high, so it sits within the channel rather than alongside it.
Will it work with the recessed track as well as the surface tracks?
Yes. It is intended for all the Magneto track types, so the same part serves shallow surface, deep surface and pendant, and recessed runs.
Can it go in a bathroom or an outbuilding?
No. It is IP20, which means dry indoor rooms only, away from splashing, steam and damp.
How should it be cleaned?
Isolate the circuit, wipe the exposed black face with a dry cloth, and keep sprays, polishes and solvents away from it.
Is there a warranty?
Yes, it carries a three year warranty from the manufacturer.