Free Delivery on all orders over £99*

LYYT DIY-DW120 Warm-to-Cool Waterproof LED Strip

£3699
The RRP is the manufacturer's recommended retail price of the item.
100 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The LYYT 12V LED strip kit provides 5 metres of flexible IP65-rated LED tape with adjustable colour temperature, controlled by an infrared remote. The strip combines 60 SMD3528 LEDs per metre in alternating warm white (3000K) and cool white (6000K) positions, allowing the IR controller to blend between warm, neutral and cool tones. The kit arrives with a UK mains adaptor, an IR controller, connecting cables and the reel of tape pre-assembled and ready to install.

Designed for kitchens, bathrooms, under-cabinet lighting, caravans, and vehicles, the strip operates on low-voltage 12Vdc and carries an IP65 rating from its epoxy silicone coating. This protects the LEDs from dust and water jets, making it suitable for bathrooms (zones 2 and 3) and outdoor applications under cover. The self-adhesive backing allows the strip to be applied directly to clean, dry surfaces, and the tape can be cut at 10cm intervals to fit custom lengths without waste.

Each metre draws 3.6W at 300mA and produces 360 lumens total output when all LEDs are active. The 120° beam angle from the SMD3528 chips provides even wash lighting rather than spotlighting, making the strip suitable for accent lighting, task lighting under worktops, and indirect cove lighting. The remote controller operates on a CR2025 battery (included) and offers pre-set colour temperature modes plus manual dimming.

Specification
Power supply 12Vdc
Number of LEDs 60/m
Beam angle 120°
Cut intervals 10cm
Reel length 5m
LED : type SMD3528
IP rating IP65
LED : spacing 16mm
Current 300mA/m
Power consumption per metre 3.6W
Cross-section 10 x 3.5mm
Weight 0.25KG
Colour Warm white (3000K) & cool white (6000K)
Lumens per LED 6lm
Battery : remote CR2025
Downloads

Product Manual

Frequently Asked

Can this strip be cut to fit a specific length?

Yes. The strip has designated cut points every 10cm (100mm). Cut only at these marked intervals to avoid damaging the circuit. Once cut, the remaining section can be reconnected using additional connectors sold separately.

What is the IP65 rating and where can I use this strip?

IP65 means the strip is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for bathroom zones 2 and 3, under kitchen worktops where splashes may occur, and outdoor applications where the strip is sheltered from direct rain.

How do I change the colour temperature?

The IR remote controller allows you to select warm white only, cool white only, or blended modes that mix both LED types for neutral white tones between 3000K and 6000K. The remote also controls dimming and on/off functions.

What power supply is needed if I extend beyond 5 metres?

Each metre draws 3.6W at 12Vdc. For runs longer than 5m (total 18W), you will need a higher-rated 12V power supply and potentially a separate run to avoid voltage drop. The included UK adaptor is rated for the 5m kit as supplied.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The LYYT 12V LED strip kit provides 5 metres of flexible IP65-rated LED tape with adjustable colour temperature, controlled by an infrared remote. The strip combines 60 SMD3528 LEDs per metre in alternating warm white (3000K) and cool white (6000K) positions, allowing the IR controller to blend between warm, neutral and cool tones. The kit arrives with a UK mains adaptor, an IR controller, connecting cables and the reel of tape pre-assembled and ready to install.

    Designed for kitchens, bathrooms, under-cabinet lighting, caravans, and vehicles, the strip operates on low-voltage 12Vdc and carries an IP65 rating from its epoxy silicone coating. This protects the LEDs from dust and water jets, making it suitable for bathrooms (zones 2 and 3) and outdoor applications under cover. The self-adhesive backing allows the strip to be applied directly to clean, dry surfaces, and the tape can be cut at 10cm intervals to fit custom lengths without waste.

    Each metre draws 3.6W at 300mA and produces 360 lumens total output when all LEDs are active. The 120° beam angle from the SMD3528 chips provides even wash lighting rather than spotlighting, making the strip suitable for accent lighting, task lighting under worktops, and indirect cove lighting. The remote controller operates on a CR2025 battery (included) and offers pre-set colour temperature modes plus manual dimming.

    Specification
    Power supply 12Vdc
    Number of LEDs 60/m
    Beam angle 120°
    Cut intervals 10cm
    Reel length 5m
    LED : type SMD3528
    IP rating IP65
    LED : spacing 16mm
    Current 300mA/m
    Power consumption per metre 3.6W
    Cross-section 10 x 3.5mm
    Weight 0.25KG
    Colour Warm white (3000K) & cool white (6000K)
    Lumens per LED 6lm
    Battery : remote CR2025
    Downloads

    Product Manual

    Frequently Asked

    Can this strip be cut to fit a specific length?

    Yes. The strip has designated cut points every 10cm (100mm). Cut only at these marked intervals to avoid damaging the circuit. Once cut, the remaining section can be reconnected using additional connectors sold separately.

    What is the IP65 rating and where can I use this strip?

    IP65 means the strip is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for bathroom zones 2 and 3, under kitchen worktops where splashes may occur, and outdoor applications where the strip is sheltered from direct rain.

    How do I change the colour temperature?

    The IR remote controller allows you to select warm white only, cool white only, or blended modes that mix both LED types for neutral white tones between 3000K and 6000K. The remote also controls dimming and on/off functions.

    What power supply is needed if I extend beyond 5 metres?

    Each metre draws 3.6W at 12Vdc. For runs longer than 5m (total 18W), you will need a higher-rated 12V power supply and potentially a separate run to avoid voltage drop. The included UK adaptor is rated for the 5m kit as supplied.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.