Free Delivery on all orders over £99*

18W IP20 CCT Adjustable Recessed Round Panel Downlight - White

£1899
The RRP is the manufacturer's recommended retail price of the item.
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

An 18W recessed panel with a round white bezel and an LED board built in, so there is no separate lamp to buy now or to replace later. It puts out 1600 lumens across a flat, evenly lit face rather than from one bright point. The colour temperature is adjustable: a small slide switch on the in-line driver box sets the white you want, so one fitting covers a warm setting for living spaces and a crisper one for working areas. The beam spreads at 120 degrees, wide enough that a run of panels overlaps and leaves no dark gaps between them. Two sprung clips fold back as the body goes up and then grip the plasterboard from above.

Recessed panels of this size earn their place in kitchens, hallways, landings, home offices and shop or office ceilings, anywhere you want light spread evenly over the whole floor rather than pooled under individual spots. Check the void above the ceiling first: the pack calls this a slimline panel, but it still needs clearance behind the plasterboard for the body and room to the side for the driver box, which sits loose in the void on its lead. The manufacturer does not state the cut-out diameter, so measure the fitting before cutting.

The panel is rated IP20, which is standard for an indoor ceiling fitting and means it should be kept to dry indoor rooms. It draws 18W for its 1600 lumens, and the driver accepts a supply of 110 to 240 volts. The manufacturer does not state whether the panel can be dimmed, so we would treat it as a fitting for a plain switched circuit until that is confirmed. Each listing is one panel, sold singly. We also list 12W and 24W recessed round panels if you need a smaller or a brighter version for the same ceiling.

Specification
Type Recessed round panel downlight
Light source Integrated LED
Wattage 18W
Brightness 1600lm
Colour temperature CCT adjustable by a switch on the driver; kelvin values not stated by the manufacturer
Beam angle 120 degrees
Finish White
IP rating IP20
Dimmable Not stated by the manufacturer
Sold as 1 panel with in-line driver on a lead
Minimum order 1, sold in multiples of 1
Frequently Asked

What size hole does it need in the ceiling?

The manufacturer does not state the cut-out diameter, so measure across the recessed body before you cut. The wider outer rim sits on the ceiling face and covers the cut edge of the plasterboard.

How do I change the colour temperature?

A small slide switch on the in-line driver box selects the white. Set it by hand before you push the panel up, because you cannot reach the switch once the fitting is seated.

Do I need to buy a bulb for it?

No. The LED board is built into the panel, so there is no cap to match and no lamp to change. At the end of its working life the whole fitting is replaced.

Can it be dimmed?

The manufacturer does not state a dimming figure and nothing on the pack covers it, so we cannot tell you it will dim. Wire it to a plain switched circuit.

What supply does it run on?

The driver accepts 110 to 240 volts, which covers UK mains. The lead ends in a push fit connector, and the mains side should be wired by a competent electrician.

How many panels will a room need?

Each one gives 1600 lumens over a 120 degree spread, far wider than a narrow spotlight. Decide the total lumens you want in the room and divide by 1600 for a starting count.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    An 18W recessed panel with a round white bezel and an LED board built in, so there is no separate lamp to buy now or to replace later. It puts out 1600 lumens across a flat, evenly lit face rather than from one bright point. The colour temperature is adjustable: a small slide switch on the in-line driver box sets the white you want, so one fitting covers a warm setting for living spaces and a crisper one for working areas. The beam spreads at 120 degrees, wide enough that a run of panels overlaps and leaves no dark gaps between them. Two sprung clips fold back as the body goes up and then grip the plasterboard from above.

    Recessed panels of this size earn their place in kitchens, hallways, landings, home offices and shop or office ceilings, anywhere you want light spread evenly over the whole floor rather than pooled under individual spots. Check the void above the ceiling first: the pack calls this a slimline panel, but it still needs clearance behind the plasterboard for the body and room to the side for the driver box, which sits loose in the void on its lead. The manufacturer does not state the cut-out diameter, so measure the fitting before cutting.

    The panel is rated IP20, which is standard for an indoor ceiling fitting and means it should be kept to dry indoor rooms. It draws 18W for its 1600 lumens, and the driver accepts a supply of 110 to 240 volts. The manufacturer does not state whether the panel can be dimmed, so we would treat it as a fitting for a plain switched circuit until that is confirmed. Each listing is one panel, sold singly. We also list 12W and 24W recessed round panels if you need a smaller or a brighter version for the same ceiling.

    Specification
    Type Recessed round panel downlight
    Light source Integrated LED
    Wattage 18W
    Brightness 1600lm
    Colour temperature CCT adjustable by a switch on the driver; kelvin values not stated by the manufacturer
    Beam angle 120 degrees
    Finish White
    IP rating IP20
    Dimmable Not stated by the manufacturer
    Sold as 1 panel with in-line driver on a lead
    Minimum order 1, sold in multiples of 1
    Frequently Asked

    What size hole does it need in the ceiling?

    The manufacturer does not state the cut-out diameter, so measure across the recessed body before you cut. The wider outer rim sits on the ceiling face and covers the cut edge of the plasterboard.

    How do I change the colour temperature?

    A small slide switch on the in-line driver box selects the white. Set it by hand before you push the panel up, because you cannot reach the switch once the fitting is seated.

    Do I need to buy a bulb for it?

    No. The LED board is built into the panel, so there is no cap to match and no lamp to change. At the end of its working life the whole fitting is replaced.

    Can it be dimmed?

    The manufacturer does not state a dimming figure and nothing on the pack covers it, so we cannot tell you it will dim. Wire it to a plain switched circuit.

    What supply does it run on?

    The driver accepts 110 to 240 volts, which covers UK mains. The lead ends in a push fit connector, and the mains side should be wired by a competent electrician.

    How many panels will a room need?

    Each one gives 1600 lumens over a 120 degree spread, far wider than a narrow spotlight. Decide the total lumens you want in the room and divide by 1600 for a starting count.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.