Description
Small, quiet and squared off, this is a little outdoor light that puts a warm glow on the wall rather than shouting for attention. The body is sand white with a clear shade, and the LED is built in, drawing 3W for around 270 lumens of warm white light. It sits close to the wall and takes up very little room, so it reads as part of the building rather than an addition to it.
We reach for fittings like this beside a front or back door, along a path, by a side gate or on a balcony, in positions with some shelter from the weather. One on its own marks a doorway; a run of them at even spacing gives a low wash along a wall without glare at eye level. It is not dimmable, so it suits a plain switch, a timer or a sensor circuit where full output is wanted the moment it comes on.
The finish is a soft sand white that sits well against render, brick and painted timber, with the clear shade keeping the light open. To clean it, turn the power off at the switch, then wipe housing and shade with a cloth wrung out in warm water and dry it; grit, cobwebs and salt film gather faster outdoors, so a look over it each spring and autumn keeps the output honest. It carries a three year warranty. We also stock the same light in anthracite, which disappears against darker cladding and dark frames, and the two sit happily on the same property where front and back are finished differently. The LED is part of the fitting, so there is nothing to replace.
Specification
| Colour |
Sand White |
| Ceiling Mountable |
Yes |
| Weight |
0.21KG |
| Length |
99mm |
| Height |
88mm |
| Projection |
33mm |
| Materials Used |
Aluminium Die-Casting Body, Glass Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
270lm (±5%) |
| Light Distribution |
Single Direction |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
4W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Clear |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
How much light does it actually give?
It produces about 270 lumens at 3000K, a warm white. That is a soft marker light for a doorway or path edge, not a floodlight.
What size is it?
It measures 99mm long by 88mm high, with a projection of 33mm from the wall, and weighs 0.21kg.
Can I dim it?
No. It is a non-dimmable fitting, so it should be run on a standard on/off circuit, a timer or a sensor rather than a dimmer.
Is it rated for outdoor positions?
Yes, it is rated IP54, which covers dust and splashing water. Choose a position with some shelter rather than one exposed to a direct jet of water.
Do I need to buy a lamp for it?
No. The 3W LED is integrated into the fitting and comes fitted as part of it.
How long is the warranty?
It carries a three year warranty.