Lerto EL 12W Garden Spike Light Cool White - Black

The Lerto EL is a garden spike light that stakes into soil to mark planting, borders and pathways after dark. It draws 12W and gives 800 lumens at 4000K, a crisp cool white tone that reads clean against foliage and gravel without warming the scene. Efficiency sits at 67 lm/W and colour rendering is Ra 80, so greens and stonework keep believable depth. Landscape spike lights like this are the North American equivalent term, and the Lerto EL fills the same role: a directional point of light set low among the planting rather than a broad area wash.

Staked into a flower bed, a shrub border or alongside a path, it works as accent and wayfinding light rather than ambient illumination, so it is best judged on throw and placement than on a room coverage figure. The single rectangular head pushes a focused cool white beam across nearby planting or up a low wall section, and several units spaced along a run build a continuous edge of light. Set it where the spike pushes into firm soil and the head clears low growth, keeping the beam aimed at what you want picked out.

Construction is aluminium alloy in a black finish, with the rectangular head carried on the integral ground spike for tool-free siting. It carries an IP54 rating, which makes it splash resistant and suited to sheltered and covered outdoor spots such as a porch or carport edge, though it should be kept clear of fully exposed positions, direct water jets and standing water. The fixture is non-dimmable and runs to a rated 25,000 hours. The Lerto range includes further outdoor spike and ground fittings for matching a garden scheme.

Is the Lerto EL suitable for outdoor use?

Yes, within limits. Its IP54 rating makes it splash resistant and fine for sheltered or covered outdoor spots such as borders near a porch or carport. Keep it out of fully exposed positions, direct water jets and standing water.

How is it mounted in the garden?

It sits on an integral ground spike that pushes into soil or a planting border, so no bracket or screws are needed. Choose firm ground and angle the rectangular head towards the planting or feature you want to light.

Can the head angle be adjusted?

The fixture is set on its spike to direct the cool white beam at nearby planting or a low wall. Aim it during installation by positioning the spike, then check the throw once it is staked and powered.

How do I clean it?

Wipe the aluminium head and lens with a soft damp cloth once it is switched off and cool, removing soil splashes and leaf debris. Avoid pressure washers or harsh solvents, which can drive water past the IP54 seal and mark the black finish.