Description
Light travels up the wall and down it from this compact outdoor fitting, escaping through clear lenses set into a slim sand white body. Six small LEDs do the work, drawing 6W between them and giving a warm white tone that sits kindly against render, brick and painted timber. The overall footprint is small, a neat horizontal block that projects little from the face of the wall. Output is fixed rather than dimmable, and the LEDs are integral, so there is nothing to fit and nothing to change later.
We would put a pair either side of a front door, where the beams graze the surface and mark the entrance without glare at eye level. They also earn their keep on porches, garage elevations, boundary walls and the long blank stretch beside a side passage, where a lantern would look fussy. Protection against dust and splashing water means an exposed elevation is no trouble. The fitting is not switched itself, so it takes its cue from a wall switch or whatever controls the rest of the garden lighting.
Sand white is a soft, chalky off-white that reads quietly by day and all but vanishes at night once the light is on, while the clear lenses keep the beams crisp. It is a Class 1 fitting and needs an earth connection. Keeping it looking well is simple: with the supply off, wipe the lenses with a damp cloth and brush grit and cobwebs from the underside after a rough week of weather, since anything sitting on the lens shows up in the beam. It carries a three year warranty. We stock the same shape in anthracite too, which we would choose against dark brick or a slate grey door.
Specification
| Colour |
Sand White |
| Ceiling Mountable |
Yes |
| Weight |
0.44KG |
| Length |
170mm |
| Height |
80mm |
| Projection |
40mm |
| Materials Used |
Aluminium Die-Casting Body, Polycarbonate Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
6 x 1W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
500lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Clear |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
How big is it on the wall?
It measures 170mm long by 80mm high, with a projection of just 40mm, so it sits close to the face of the wall.
How much light does it give?
500 lumens in total at 3000K, a warm white split between the upward and downward beams.
Can the LEDs be replaced?
No. The LEDs are integrated, so the fitting is supplied complete and there is no lamp to buy or swap.
Is it suitable for a wall with no shelter above it?
Yes. It is rated IP54, which covers dust and splashing water from any direction on an exterior wall.
Will it work with a dimmer?
No, it is non-dimmable and should be run from a standard on/off switch or a timer.
Is there another finish?
Yes, we also stock this one in anthracite.