LED Rope Light 30W IP65 15m Outdoor Decorative - Red

This LED rope light is a round, flexible encased tube giving a continuous line of red light along its full 15m length. It draws 30W and carries an IP65 rating, so the diodes sit sealed inside a clear sleeve that copes with rain and damp. Many buyers know this format as led rope light or simply rope light, and in the US it sits alongside led tape light as a decorative outline product rather than a bare cut strip. The 13mm diameter tube bends around corners and curves to follow the shape of whatever it edges, holding an even red glow with no visible hot spots.

Its 15m run suits outlines, eaves, balustrades, decking edges and garden features where a clear decorative line is wanted rather than task brightness. The 90 lumens are spread across the whole length, so this is a marker and accent light, tracing a roofline, archway or path edge rather than lighting a room. The red tone works well for seasonal displays, bar and patio borders, signage outlines and feature walls. Run it close to the surface you want to define and let the tube follow the contour, since the colour reads best when the line is seen rather than relied on for general illumination.

The rope is fed through its controller and connection kit at one end rather than cut like a bare strip, so the 15m length is used as supplied. It runs at 210V DC and the sealed IP65 sleeve makes it fit for exposed outdoor and wet locations, not just sheltered spots. Rated at around 15,000 hours and weighing 2.21kg over the full run, it stays cool and low maintenance once fixed in place. Wipe the tube clean with a damp cloth to keep the red output bright.

Product Specification Sheet

Range Datasheet

Can it be used outdoors in the rain?

Yes. The IP65 rating means the sealed tube is weatherproof and suited to exposed outdoor and wet locations, including direct rain. It works equally well indoors for decorative outlines.

Can this rope light be cut to length?

No. Unlike a bare LED strip, this is a sealed rope fed through its controller and connection kit, so it is used at its supplied 15m length rather than cut at intervals. Plan the run to suit the full length when fitting it.

What voltage does it run at?

It runs at 210V DC through its supplied connection, so it is not wired bare into a standard socket. Use only the matching controller and kit provided for the rope.

How do I keep it looking its best?

Wipe the clear tube with a soft damp cloth now and then to clear dust and grime, which keeps the red light clean and bright. Make sure the rope is switched off and cool before cleaning.