Laven 130x130 Garden Spike Light Surface E27 80cm - Anthracite

The Laven garden spike light is a staked outdoor fitting that pushes into soil or a planted border to light borders, shrubs and pathway edges from ground level. It runs on 220-240V AC mains through a single E27 lamp holder, taking a lamp up to 10W, so you can pick the bulb tone and output to suit the planting. In US terms this sits within the landscape and pathway spike family, where the spike anchors the fixture above ground rather than recessing it. The 80cm overall height lifts the light above low planting to graze foliage and edge a route.

Use it along borders, in flower beds and beside paths where a sheltered or partly covered position keeps it clear of direct exposure. Because the spike is staked into soft ground, it suits established beds and gravel margins rather than hard paving. Coverage is best judged by throw rather than room area: a single spike picks out a plant or a short stretch of edge, so space several along a path or around a bed for an even wash. Position it under eaves, a porch or a carport where it gains some shelter from the weather.

The body is aluminium alloy in an anthracite finish that blends into planting and resists corrosion outdoors. It carries an IP44 rating, splash-resistant and sheltered, so keep it out of fully exposed spots, direct water jets and standing water. The E27 lamp is supplied separately, letting you set the colour temperature and dimming to match the rest of your scheme. Mounting is by the integral ground spike, with the fitting weighing 1.62kg. Other Laven decking and ground lights are available across the range for matching schemes.

Is this garden spike light suitable for outdoor use?

Yes, within limits. Its IP44 rating makes it splash-resistant and suited to sheltered or partly covered outdoor positions such as borders under eaves, a porch or a carport. Keep it clear of fully exposed sites, direct water jets and standing water.

Can I adjust the angle of the light?

The spike stakes vertically into soil or a border, so you set the direction by how you angle the fitting in the ground. This lets you tilt the beam towards a plant, wall or path edge. Firm the spike into established ground for a stable position.

Is a bulb included?

No, the E27 lamp is supplied separately. This lets you choose the wattage up to 10W and the colour temperature to suit your planting and scheme. An E27 LED lamp is the most efficient choice for this fitting.

How do I clean it?

Wipe the anthracite aluminium body with a soft damp cloth once the fitting is switched off and cool. Avoid abrasive cleaners that could mark the finish, and clear away soil or leaf debris around the base. Regular cleaning keeps the output bright and the body free of build-up.