Lart 260 Square E27 IP54 Bulkhead Wall Light - Anthracite

The Lart 260 is a square LED bulkhead built around twin E27 lamp holders, each rated up to 60W, so the output and tone depend on the bulbs you fit (GLS, CFL or LED all work in the E27 base). It runs on 220 to 240V AC mains and is not dimmable as standard. American buyers will recognise this format as an outdoor wall sconce or wall pack: a compact surface fitting that throws a broad, even wash across the wall it sits on and the area immediately below, rather than a tight directional beam.

Measuring 110 by 180 by 300 mm and weighing 1.42 kg, the Lart 260 suits porches, covered entrances, carports, hallways, stairwells and utility walls. The IP54 rating makes it splash-resistant and sheltered-rated, so it works well in bathroom zones and under cover outdoors where it stays clear of direct rain. With two E27 holders carrying up to 60W each, you can balance brightness against running cost by choosing the LED equivalent wattage that fits the spot, giving a soft surrounding glow for a doorway or a brighter spread for a passageway.

Built from aluminium alloy in an anthracite finish, the body is squared off with a clean face suited to modern exteriors and interiors alike. The IP54 seal guards against splashing water and dust ingress, which is why it earns its place on sheltered walls rather than fully exposed positions. It surface-mounts directly to the wall and takes standard E27 bulbs, which are supplied separately so you can pick the colour temperature and output you prefer. Other square and round shapes sit alongside this within the wider Lart range from Kanlux.

Can the Lart 260 be used outdoors?

It carries an IP54 rating, which makes it splash-resistant and suited to sheltered outdoor spots such as a porch, carport or covered entrance. Keep it clear of fully exposed positions and direct rain or water jets, as IP54 covers splashing rather than heavy weather. It is equally at home indoors on hallway and stairwell walls.

Are bulbs included with this fitting?

No, the Lart 260 has two E27 lamp holders but the bulbs are supplied separately. This lets you choose the light source and colour temperature to suit the location, whether GLS, CFL or LED. Each holder takes a lamp rated up to 60W.

Is the Lart 260 dimmable?

The fitting itself is not dimmable as standard. If you want to dim it, you would need dimmable LED bulbs in the E27 holders paired with a compatible dimmer switch. Check that both the lamps and the switch are rated for dimming before installing.

How should I clean and maintain it?

Switch off the supply and let the bulbs cool, then wipe the anthracite aluminium body and face with a soft, slightly damp cloth. Avoid abrasive cleaners or solvents that could mark the finish. A periodic wipe keeps the IP54 seal and surface in good condition, particularly in sheltered outdoor positions where dust can gather.