Description
This is the Traditional lantern cut in half and set flat against the wall. The half lantern shape is what makes this wall light useful: it takes the same cast detail and the same hand-cut glass as the full lantern but projects only 280mm, so it clears a door swing, a narrow passage or a low soffit where an arm would be in the way. At 560mm tall it is the larger of the two Traditional half lanterns, and it throws light forward and down across a doorway rather than out into the garden.
People usually buy two, one either side of an entrance, because a pair kills the shadow that a single light leaves on the steps. It also works on a garage, an outbuilding, a stairwell or the wall of a passage between houses. Harte cast it in iron with galvanised steel, hand spray it in gloss black enamel and rate it IP44, which covers splashing from any direction. It weighs 11.90KG, light enough for an ordinary masonry fixing, and it is straightforward to put up because the back plate sits flat.
The lamp is an E27 screw fitting, supplied empty, so you choose the output and the colour rather than living with a sealed unit. Harte suggest a 7W LED at 2700K for a warm entrance light. Everything is made to order in County Wexford, so allow two to five weeks, and any RAL colour can be sprayed instead of black if you say so when ordering. Outdoor wiring needs a qualified electrician and a protected circuit.
Specification
| Height |
560mm |
| Width |
280mm |
| Maximum Wattage |
1 x 100W max (lamps not included) |
| Socket |
E27 |
| Bulb(s) Included |
No |
| IP Rating |
IP44 |
| Material |
Cast Iron & Galvanised Steel |
| Glazing |
Hand-Cut Glass |
| Finish |
Hand Sprayed Enamel Gloss Paint |
| Colour |
Black |
| Voltage |
220-240V |
| Cable |
3 Core Insulated |
| Weight |
11.90KG |
| LED Panel Option |
Yes |
| Country of Origin |
Ireland |
Downloads
Data Sheet
Frequently Asked
How far does this bulkhead stick out from the wall?
280mm, against an overall height of 560mm. That is shallow enough to clear most door swings and narrow passages.
Should I buy one or two?
Most entrances take a pair, one either side of the door, because two lights remove the shadow a single fitting leaves across the steps. A single light suits a garage or a passage.
What is it made of?
Cast iron and galvanised steel, hand sprayed in gloss black enamel, glazed in hand-cut glass. It weighs 11.90KG.
What IP rating does it carry?
IP44, which covers splashing from any direction. That suits a doorway, a porch or a garage wall.
What bulb does it take?
An E27 screw lamp, not supplied. A 7W LED at 2700K is the usual choice. The maximum for the fitting is 100W in total.
How long does it take to arrive?
Two to five weeks. Harte make each light to order in County Wexford rather than holding stock.