Free Delivery on all orders over £99*

Knightsbridge LED Plinth Light - Matt White

£1299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LED plinth light is an 87.5mm square fitting designed to sit flush in skirting boards, kitchen plinths and stair risers, casting a low-level 15-lumen glow across the floor ahead. The integrated 0.8W SMD LED produces cool white 4000K light behind an opal diffuser, providing orientation lighting without glare.

Designed for indoor installation in kitchens, hallways and staircases, the fitting requires a minimum 25mm mounting depth behind the plinth or skirting board and connects to 230V mains. The screwless matt white faceplate sits flush with the surrounding surface once installed, projecting just 4.3mm from the wall. The low wattage means multiple fittings can be wired on a single circuit without significant load.

The steel construction provides durability in high-traffic areas where plinths and skirting boards endure regular impact from feet, vacuum cleaners and mops. The matt white finish blends into white and light-painted woodwork, while the IP20 rating confirms suitability for dry indoor areas only. The fitting is non-dimmable and certified to EN 60598-1, EN 60598-2-2, EN 62471, EN 55015, EN 61547, EN 61000-3-2/-3.

Specification
Height 87.5 mm
Width 87.5 mm
Projection 4.3 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Matt White
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Diffuser Opal
Lamp Technology SMD LED
Lamp Included Yes
Dimmable No
CCT 4000 K
Light Colour Cool White
Lumens 15 lm
Wattage 0.8
Efficacy 19 lm/W
CRI >80
Earth Terminal Yes
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What depth is required behind the plinth or skirting?

A minimum 25mm mounting depth is needed behind the surface where the fitting will sit. The faceplate projects 4.3mm from the wall once installed, so total clearance from rear mounting point to finished surface should be at least 29mm.

Is this suitable for bathrooms or outdoor use?

No. The IP20 rating confirms this fitting is for dry indoor areas only. It is not suitable for bathrooms, wetrooms, outdoor plinths or any location where it may be exposed to moisture or splashing.

Can multiple fittings be wired on the same circuit?

Yes. At 0.8W per fitting, multiple plinth lights can be wired on a single lighting circuit without significant load. For example, ten fittings would draw just 8W total.

Is the LED replaceable?

No. The LED is integrated into the fitting and non-replaceable. The fitting carries a 2-year warranty and the LED is rated for typical long-term use.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LED plinth light is an 87.5mm square fitting designed to sit flush in skirting boards, kitchen plinths and stair risers, casting a low-level 15-lumen glow across the floor ahead. The integrated 0.8W SMD LED produces cool white 4000K light behind an opal diffuser, providing orientation lighting without glare.

    Designed for indoor installation in kitchens, hallways and staircases, the fitting requires a minimum 25mm mounting depth behind the plinth or skirting board and connects to 230V mains. The screwless matt white faceplate sits flush with the surrounding surface once installed, projecting just 4.3mm from the wall. The low wattage means multiple fittings can be wired on a single circuit without significant load.

    The steel construction provides durability in high-traffic areas where plinths and skirting boards endure regular impact from feet, vacuum cleaners and mops. The matt white finish blends into white and light-painted woodwork, while the IP20 rating confirms suitability for dry indoor areas only. The fitting is non-dimmable and certified to EN 60598-1, EN 60598-2-2, EN 62471, EN 55015, EN 61547, EN 61000-3-2/-3.

    Specification
    Height 87.5 mm
    Width 87.5 mm
    Projection 4.3 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Matt White
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Diffuser Opal
    Lamp Technology SMD LED
    Lamp Included Yes
    Dimmable No
    CCT 4000 K
    Light Colour Cool White
    Lumens 15 lm
    Wattage 0.8
    Efficacy 19 lm/W
    CRI >80
    Earth Terminal Yes
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What depth is required behind the plinth or skirting?

    A minimum 25mm mounting depth is needed behind the surface where the fitting will sit. The faceplate projects 4.3mm from the wall once installed, so total clearance from rear mounting point to finished surface should be at least 29mm.

    Is this suitable for bathrooms or outdoor use?

    No. The IP20 rating confirms this fitting is for dry indoor areas only. It is not suitable for bathrooms, wetrooms, outdoor plinths or any location where it may be exposed to moisture or splashing.

    Can multiple fittings be wired on the same circuit?

    Yes. At 0.8W per fitting, multiple plinth lights can be wired on a single lighting circuit without significant load. For example, ten fittings would draw just 8W total.

    Is the LED replaceable?

    No. The LED is integrated into the fitting and non-replaceable. The fitting carries a 2-year warranty and the LED is rated for typical long-term use.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.