Description
The Knightsbridge IK08 is a 21W LED outdoor wall light with an integrated SMD LED array delivering 1000-1200 lumens (depending on colour temperature setting) behind an opal polycarbonate diffuser and black ABS frame. The light mounts to external walls as general illumination for entrances, rear gardens, driveways and communal areas, with IP65 ingress protection against dust and water jets from any direction.
The colour temperature switches between 3000K warm white, 4000K neutral white and 6500K cool daylight via a physical switch on the fitting, allowing the light tone to be changed on installation or adjusted later depending on the setting. The 3000K output produces 1000 lumens, the 4000K setting 1200 lumens, and the 6500K setting 1100 lumens. The 105-degree beam angle spreads light evenly across walls and ground within 3-4m of the fitting.
The IK08 impact rating means the fitting withstands a 1.7kg mass dropped from 295mm height, making it suitable for positions where accidental contact with garden tools, footballs or gate-swinging is likely. The polycarbonate diffuser and ABS housing resist corrosion in coastal environments and marine salt exposure, so the fitting can be installed in seafront properties without accelerated degradation. The Class II double-insulated construction requires only live and neutral wiring, no earth connection needed.
Specification
| Height |
170 mm |
| Width |
320 mm |
| Projection |
136 mm |
| Construction |
ABS |
| Construction 2 |
& polycarbonate |
| Finish |
Black |
| Class |
II |
| IP Rating |
IP65 |
| Primary Voltage |
230V 50Hz |
| Diffuser |
Opal |
| Lamp Technology |
SMD LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| L70B50 |
36000 |
| Energy Rating (Class) post 2021 SLR |
E |
| Beam Angle |
105 |
| CCT |
3000/4000/6500 K |
| Light Colour |
CCT |
| Lumens |
1000/1200/1100 lm |
| Lumens (Light Source only) |
2250/2600/2500 lm |
| Wattage |
21 |
| Efficacy |
134.5 lm/W |
| CRI |
>85 |
| Warranty |
3 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
How do I change the colour temperature?
A physical switch on the fitting allows you to select between 3000K warm white, 4000K neutral white and 6500K cool daylight. The setting can be changed on installation or adjusted later by removing the cover to access the switch. The light must be powered off before changing the setting.
What does IP65 and IK08 mean?
IP65 confirms the fitting is fully dust-tight and protected against water jets from any direction, so it can be mounted on external walls exposed to rain. IK08 means it withstands a 1.7kg impact from 295mm height, offering protection against accidental knocks from garden tools or footballs.
Can this be used in coastal locations?
Yes. The ABS housing and polycarbonate diffuser resist corrosion from salt spray and marine environments, making the fitting suitable for coastal properties without requiring additional protective coatings.
Does it need an earth connection?
No. The fitting is Class II double-insulated, which means it requires only live and neutral connections. No earth wire is needed, simplifying installation where earthing is not readily available.