Free Delivery on all orders over £99*

Knightsbridge 6W LED Emergency Bulkhead IP65 - Maintained or Non-Maintained

£2799
The RRP is the manufacturer's recommended retail price of the item.
480 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge EMLED1L is a 6W LED emergency bulkhead rated IP65 for both indoor and outdoor installation. The polycarbonate body and prismatic diffuser house an integrated SMD LED array delivering 490 lumens in mains mode and 260 lumens during emergency operation, maintaining illumination for a minimum of 3 hours on battery power. The fitting can be configured for maintained, non-maintained or switched emergency operation depending on site requirements.

Designed for emergency exit route lighting in commercial buildings, car parks, stairwells, corridors and outdoor covered areas, the bulkhead meets Class II insulation standards and operates on 230V 50Hz mains supply. The IP65 rating provides protection against dust ingress and water jets, allowing the fitting to be installed in damp or exposed outdoor locations where standard emergency fittings would fail. A self-adhesive legend kit is supplied as standard, allowing exit signage to be applied directly to the diffuser face without additional hardware.

The 345mm length and 107mm width give the bulkhead a substantial presence on walls and ceilings without dominating smaller corridors, while the 76mm projection keeps the fitting close to the mounting surface. The built-in easy-fit gear tray simplifies installation and maintenance access, and the LiFePO4 battery technology provides longer service life and better temperature performance than older NiCd cells. The 6000K daylight colour temperature and 115-degree beam angle spread light evenly across exit routes, and the >80 CRI ensures colour rendering meets commercial building standards.

Specification
Length 345 mm
Width 107 mm
Projection 76 mm
Construction Polycarbonate
Finish White
Class II
IP Rating IP65
Primary Voltage 230V 50Hz
Diffuser Prismatic
Emergency Maintained / Non-maintained / Switched
Lamp Technology SMD LED
Lamp Included Yes
Dimmable No
Beam Angle 115
CCT 6000 K
Light Colour Daylight
Lumens 490 lm
Lumens (Em. mode) 260 lm
Wattage 6
Efficacy 75.79 lm/W
CRI >80
Warranty 3
Downloads

Product Specification Sheet

Frequently Asked

What is the difference between maintained and non-maintained mode?

In non-maintained mode the bulkhead only illuminates during a mains power failure, drawing from the battery. In maintained mode the LED stays lit continuously on mains power and switches to battery during power loss. The EMLED1L can be configured for either mode on installation depending on whether the location requires constant illumination or emergency-only lighting.

How long does the emergency battery last?

The LiFePO4 battery provides a minimum of 3 hours of emergency illumination at 260 lumens when fully charged. The battery recharges automatically when mains power is restored.

Is the IP65 rating suitable for outdoor use?

Yes. The IP65 rating protects against dust ingress and water jets, making the bulkhead suitable for outdoor covered areas such as canopies, loading bays, external stairwells and car park entrances where the fitting is shielded from direct rainfall.

What legend kit is included?

A self-adhesive legend kit is supplied as standard, allowing exit signage to be applied to the diffuser face. The legend sheet typically includes directional arrows and text to indicate emergency exit routes.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge EMLED1L is a 6W LED emergency bulkhead rated IP65 for both indoor and outdoor installation. The polycarbonate body and prismatic diffuser house an integrated SMD LED array delivering 490 lumens in mains mode and 260 lumens during emergency operation, maintaining illumination for a minimum of 3 hours on battery power. The fitting can be configured for maintained, non-maintained or switched emergency operation depending on site requirements.

    Designed for emergency exit route lighting in commercial buildings, car parks, stairwells, corridors and outdoor covered areas, the bulkhead meets Class II insulation standards and operates on 230V 50Hz mains supply. The IP65 rating provides protection against dust ingress and water jets, allowing the fitting to be installed in damp or exposed outdoor locations where standard emergency fittings would fail. A self-adhesive legend kit is supplied as standard, allowing exit signage to be applied directly to the diffuser face without additional hardware.

    The 345mm length and 107mm width give the bulkhead a substantial presence on walls and ceilings without dominating smaller corridors, while the 76mm projection keeps the fitting close to the mounting surface. The built-in easy-fit gear tray simplifies installation and maintenance access, and the LiFePO4 battery technology provides longer service life and better temperature performance than older NiCd cells. The 6000K daylight colour temperature and 115-degree beam angle spread light evenly across exit routes, and the >80 CRI ensures colour rendering meets commercial building standards.

    Specification
    Length 345 mm
    Width 107 mm
    Projection 76 mm
    Construction Polycarbonate
    Finish White
    Class II
    IP Rating IP65
    Primary Voltage 230V 50Hz
    Diffuser Prismatic
    Emergency Maintained / Non-maintained / Switched
    Lamp Technology SMD LED
    Lamp Included Yes
    Dimmable No
    Beam Angle 115
    CCT 6000 K
    Light Colour Daylight
    Lumens 490 lm
    Lumens (Em. mode) 260 lm
    Wattage 6
    Efficacy 75.79 lm/W
    CRI >80
    Warranty 3
    Downloads

    Product Specification Sheet

    Frequently Asked

    What is the difference between maintained and non-maintained mode?

    In non-maintained mode the bulkhead only illuminates during a mains power failure, drawing from the battery. In maintained mode the LED stays lit continuously on mains power and switches to battery during power loss. The EMLED1L can be configured for either mode on installation depending on whether the location requires constant illumination or emergency-only lighting.

    How long does the emergency battery last?

    The LiFePO4 battery provides a minimum of 3 hours of emergency illumination at 260 lumens when fully charged. The battery recharges automatically when mains power is restored.

    Is the IP65 rating suitable for outdoor use?

    Yes. The IP65 rating protects against dust ingress and water jets, making the bulkhead suitable for outdoor covered areas such as canopies, loading bays, external stairwells and car park entrances where the fitting is shielded from direct rainfall.

    What legend kit is included?

    A self-adhesive legend kit is supplied as standard, allowing exit signage to be applied to the diffuser face. The legend sheet typically includes directional arrows and text to indicate emergency exit routes.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.