Free Delivery on all orders over £99*

Knightsbridge 200W 24V Constant Voltage LED Driver - Non-Dimmable

£4299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 24DC200M is a 200W constant voltage LED driver delivering stable 24V output for LED strip installations, under-cabinet lighting and architectural LED systems. The driver converts switchable 110V or 230V mains input to regulated 24V DC output, with adjustable voltage fine-tuning to compensate for cable voltage drop in longer runs.

Designed for installation within control panels, ceiling voids and purpose-built enclosures, the driver requires IP20 or higher protective housing when installed in accessible locations or where moisture may be present. The aluminium and stainless steel construction provides effective heat dissipation at full load, with passive convection cooling requiring no fans or active airflow. The 215mm x 115mm x 30mm footprint fits standard distribution boards and LED control enclosures.

Built-in protection circuits guard against short circuit, overload and overvoltage conditions, shutting down output and protecting downstream LED circuits from damage. The driver operates at 89.5% efficiency at full 200W load, reducing wasted energy as heat compared to older transformer-based designs. The screw terminal block accepts cable gauges suitable for the 8.3A maximum output current at 24V.

Specification
Length 215 mm
Width 115 mm
Depth 30 mm
Construction Aluminium
Construction 2 & stainless steel
Finish Stainless Steel
Class I
IP Rating IP20
Primary Voltage 110/230V
Dimmable No
Driver Type Constant Voltage
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Does this driver need an enclosure?

Yes. The IP20 rating means the driver is not protected against moisture or accidental contact. Install within a suitable IP-rated enclosure when used in accessible locations, ceiling voids or anywhere moisture may be present.

Can the output voltage be adjusted?

Yes. The driver includes adjustable output voltage to fine-tune the 24V output and compensate for voltage drop in longer cable runs between the driver and LED load.

What's the maximum LED load in metres?

The 200W capacity supports approximately 16 metres of typical 12W/m 24V LED strip, or 33 metres of 6W/m strip. Actual length depends on the specific power consumption per metre of your LED product and acceptable voltage drop.

Is this driver dimmable?

No. This is a non-dimmable constant voltage driver. For dimming 24V LED systems, pair with a separate PWM or 0-10V dimmer controller between the driver output and the LED load.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 24DC200M is a 200W constant voltage LED driver delivering stable 24V output for LED strip installations, under-cabinet lighting and architectural LED systems. The driver converts switchable 110V or 230V mains input to regulated 24V DC output, with adjustable voltage fine-tuning to compensate for cable voltage drop in longer runs.

    Designed for installation within control panels, ceiling voids and purpose-built enclosures, the driver requires IP20 or higher protective housing when installed in accessible locations or where moisture may be present. The aluminium and stainless steel construction provides effective heat dissipation at full load, with passive convection cooling requiring no fans or active airflow. The 215mm x 115mm x 30mm footprint fits standard distribution boards and LED control enclosures.

    Built-in protection circuits guard against short circuit, overload and overvoltage conditions, shutting down output and protecting downstream LED circuits from damage. The driver operates at 89.5% efficiency at full 200W load, reducing wasted energy as heat compared to older transformer-based designs. The screw terminal block accepts cable gauges suitable for the 8.3A maximum output current at 24V.

    Specification
    Length 215 mm
    Width 115 mm
    Depth 30 mm
    Construction Aluminium
    Construction 2 & stainless steel
    Finish Stainless Steel
    Class I
    IP Rating IP20
    Primary Voltage 110/230V
    Dimmable No
    Driver Type Constant Voltage
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Does this driver need an enclosure?

    Yes. The IP20 rating means the driver is not protected against moisture or accidental contact. Install within a suitable IP-rated enclosure when used in accessible locations, ceiling voids or anywhere moisture may be present.

    Can the output voltage be adjusted?

    Yes. The driver includes adjustable output voltage to fine-tune the 24V output and compensate for voltage drop in longer cable runs between the driver and LED load.

    What's the maximum LED load in metres?

    The 200W capacity supports approximately 16 metres of typical 12W/m 24V LED strip, or 33 metres of 6W/m strip. Actual length depends on the specific power consumption per metre of your LED product and acceptable voltage drop.

    Is this driver dimmable?

    No. This is a non-dimmable constant voltage driver. For dimming 24V LED systems, pair with a separate PWM or 0-10V dimmer controller between the driver output and the LED load.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Refunds are made in line with our returns policy, which has the full details.

    To arrange a return, call us on 020 8149 5199 or use our contact page.