Description
The Knightsbridge LEDM07W is a 62mm diameter recessed ground light with a 1.5W integrated LED, 304 stainless steel bezel and die-cast aluminium body. The integrated LED produces 70 lumens of 4000K cool white light through an opal diffuser at a 45-degree beam angle, and the IP65 rating protects the internal components against dust ingress and low-pressure water jets from any direction.
Designed for driveways, pathways, patios and garden borders, the light is drive-over rated to 800kg at 5mph when installed in the supplied plastic mounting sleeve within tarmac or concrete. The 1.5m of outdoor-rated three-core 230V cable allows connection to standard outdoor mains circuits without requiring a separate driver box. The 83mm recessed depth and 60mm cut-out diameter (with sleeve) mean the light sits flush with the paving surface once installed, leaving only the 62mm stainless steel bezel visible.
The 304 stainless steel bezel resists corrosion in outdoor conditions and the die-cast aluminium body dissipates heat from the LED efficiently without requiring active cooling. The opal diffuser spreads the light output evenly across the 45-degree beam without creating harsh spotting, making the light suitable for path edging where glare needs to be minimised. The LED is rated at L70B50 for 50,000 hours, meaning 70% of the original light output remains after 50,000 hours of continuous use. The light is non-dimmable and operates directly on 230V 50Hz mains without requiring a compatible dimmer circuit.
Specification
| Diameter |
62 mm |
| Recessed Depth |
83 mm |
| Cut-out Diameter |
50 mm |
| Cut-out with Sleeve |
60 mm |
| Construction |
304 Stainless steel |
| Construction 2 |
& die-cast aluminium |
| Finish |
Stainless Steel |
| Class |
I |
| IP Rating |
IP65 |
| Primary Voltage |
230V 50Hz |
| Cable Length |
1.5 m |
| Diffuser |
Opal |
| Maximum Weight Loading |
800kg at 5mph |
| Lamp Technology |
LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| L70B50 |
50000 |
| Energy Rating (Class) post 2021 SLR |
G |
| Beam Angle |
45 |
| CCT |
4000 K |
| Light Colour |
Cool White |
| Lumens |
70 lm |
| Lumens (Light Source only) |
85 lm |
| Wattage |
1.5 |
| Efficacy |
54.13 lm/W |
| CRI |
>80 |
| Warranty |
3 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
Can this be driven over?
Yes, when installed in the supplied plastic mounting sleeve within tarmac or concrete, the light is rated for vehicles up to 800kg travelling at 5mph or less. This makes it suitable for residential driveways with careful vehicle movement.
What installation depth is required?
The light requires an 83mm recessed depth below the surface level and a 60mm diameter cut-out when using the supplied mounting sleeve. The sleeve is essential for drive-over installations and recommended for all outdoor ground installations to protect the light body and allow for easier maintenance access.
Is it suitable for wet locations?
Yes, the IP65 rating protects against dust ingress and low-pressure water jets from any direction, making the light suitable for patios, pathways and driveways exposed to rain and surface water. It should not be installed in areas that flood or where it will be fully submerged.
Can the LED be replaced?
No, the LED is integrated into the light and non-replaceable. The L70B50 rating of 50,000 hours means the LED should retain 70% of its original output after approximately 5.7 years of continuous use, or significantly longer under typical outdoor use patterns where the light operates for 6-10 hours per night.