Description
Recessed spots do not have to advertise themselves, and this one keeps its edges to a minimum: a slim black trim stands barely 5mm proud of the ceiling line, with a shallow body behind it of just 35mm. It is sized to a 60mm cut-out and takes a GU10 lamp, with an LED reflector being the sort we would choose for it. It is not dimmable, so pair it with a plain switch rather than a dimmer plate.
This is the fitting we reach for in kitchens, along hallways and over landings, where the ceiling void is tight and a deeper housing would be a nuisance. Because it is sealed against splashes and dust, it also works over a bath, in a shower room or in a utility where steam and airborne grime are part of daily life. The small trim size suits runs of several spots spaced across a room without the ceiling looking busy, and it sits happily alongside larger fittings where the downlights are doing quiet background work rather than leading the scheme.
The bezel and body are finished in black, matt and low in reflection so the aperture reads as a dark circle rather than a bright ring, and the whole thing is light enough to handle one-handed. It is double insulated, and intended for ordinary household mains in dry or damp interior rooms. For upkeep, turn the circuit off, give the lamp time to lose its heat, then wipe around the trim with a dry cloth; in a bathroom, a slightly damp cloth will lift limescale spotting, but keep solvents and cream cleaners away from the paint. It carries a one year warranty. We stock the same spot in white if you would rather it vanished into a painted ceiling, and mixing the two across a home is fine where one room is dark-trimmed and another pale. Lamps are supplied separately.
Specification
| Colour |
Black |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.06KG |
| Diameter |
66mm |
| Height |
35mm |
| Cut Out |
60mm |
| Materials Used |
Aluminium |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does this downlight need?
It is designed for a 60mm cut-out. The visible trim measures 66mm across, so it covers the aperture with a small margin all round.
How deep is the fitting?
The body is 35mm deep, which makes it one of the shallower GU10 spots we carry.
Which lamp should I use?
A GU10 LED reflector lamp is what we would fit. Lamps are not included, so choose the beam and colour temperature to suit the room.
Can I put it on a dimmer?
No. This spot is non-dimmable and should be run from a standard on/off switch.
Is it suitable for a bathroom?
Yes, it is rated against splashing water and dust ingress, so it is suited to bathrooms, shower rooms and utility spaces as well as dry interiors.
Is there a warranty?
It carries a one year warranty.