Description
A compact square outdoor wall light in sand white, small enough to read as part of the wall rather than something applied to it. Light comes from a single GU10 lamp set behind the front opening, so the output is directed rather than scattered, giving a defined pool instead of a broad glow. The body is a shallow square of about 70mm, with a short projection that keeps it well clear of doors and gates. It is unswitched, running from a switch elsewhere on the circuit, and it is not dimmable.
We would use it beside a front door, along a path wall, at a porch or by a garage, wherever a small marker of light is wanted without the bulk of a lantern. It is rated for outdoor positions, holding out dust and splashing rain, so it works in a covered passage or out on an open patio. Because it takes a standard reflector lamp, the character is yours to set: a warm white LED for a welcoming doorway, a cooler one where you want steps read clearly. A 10W ceiling on the lamp keeps running costs modest, which helps if you are lighting several points around a garden.
The housing is painted in sand white, a soft off-white that sits well against render, brick and painted timber, and holds its own next to stainless or chrome ironmongery. Keep it looking right by wiping the paint with a damp cloth and drying it off; grit and cobwebs gather faster outside than in, so a look over it each season pays off. It carries a two year warranty. We also stock the Kandanchu shape in round, and this square body in anthracite, rust brown and sand black, so a run of them can be matched or mixed across a frontage. Lamps are not included.
Specification
| Colour |
Sand White |
| Wall Mountable |
Yes |
| Weight |
0.35KG |
| Width |
70mm |
| Height |
80mm |
| Projection |
95mm |
| Materials Used |
Die-cast Aluminium, Glass |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Max Low Energy Lamp (W) |
10W |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
Which lamp should I fit?
One GU10 lamp, up to 10W. An LED reflector of the usual 50mm GU10 form suits it best. Lamps are not supplied, so choose the colour temperature you prefer.
Can it be dimmed?
No, this one is non-dimmable and should be run from a standard on/off switch.
How weatherproof is it?
It is IP54 rated, which covers dust and splashing water, so it is suitable for exposed outdoor walls as well as sheltered porches and passages.
What size is it on the wall?
The square face measures 70mm wide by 80mm high, with a projection of 95mm from the wall. Weight is 0.35kg.
Does it have its own switch?
No, it is supplied unswitched and is controlled from elsewhere on the circuit.
How should I clean the finish?
A damp cloth and a dry off is all it needs. Avoid abrasive pads or solvents, which will dull the painted sand white surface.