Description
A compact outdoor wall light with a square face 70mm across, finished throughout in anthracite. It takes a single GU10 lamp, with a reflector LED being the sensible choice, and the maximum rating is a modest 10W, so this is a fitting for pools of light rather than floodlighting. There is no switch on the body and no dimming, so it runs from a switch indoors or from a garden lighting circuit, and it needs an earth.
Its small footprint and shallow projection make it useful where a bigger lantern would look heavy: beside a front door, over a back step, along the narrow passage at the side of a house, or repeated at even spacing down a boundary wall. It is sealed against rain and windblown dust, which covers open porches, exposed door surrounds and garden walls. We reach for it in pairs, one either side of an entrance, and on longer walls a run of three or four gives a rhythm that a single larger fitting cannot.
The finish is a deep grey that sits quietly against brick, render and painted timber, and it holds its own next to dark window frames and anthracite guttering. Keep it looking right by turning the power off at the switch, letting the fitting go cold, then going over the body with a cloth wrung out in warm water and drying it off; grit and cobwebs are the usual culprits outdoors, not dust. It carries a two year warranty. We stock the square body in anthracite, sand white, rust brown and sand black, in one lamp and two lamp versions, and the same finishes in a round body if you prefer a softer outline, so a whole elevation can be treated in one family. The GU10 lamp is not included.
Specification
| Colour |
Anthracite |
| Wall Mountable |
Yes |
| Weight |
0.35KG |
| Width |
70mm |
| Height |
80mm |
| Projection |
95mm |
| Materials Used |
Die-cast Aluminium, Glass |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Max Low Energy Lamp |
10W |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
What size lamp does it take?
One GU10, and a 50mm reflector LED works best. The maximum is 10W, which suits accent and doorway lighting.
How far does it stand off the wall?
Projection is 95mm, with a height of 80mm and a width of 70mm, so it stays tight to the wall.
Can I dim it?
No, this fitting is not dimmable, so pair it with a standard on/off switch rather than a dimmer.
Is it suitable for an exposed wall?
Yes. It is rated IP54, which covers rain and windblown dust on porches, door surrounds and garden walls.
Does it come with a switch on the body?
No, it is unswitched, so it should be wired to a switch or circuit elsewhere. It is a Class 1 fitting and needs an earth connection.
Is there a matching light for the rest of the garden?
Yes. The same square body comes in a two lamp version, and there are round versions too, in anthracite, sand white, rust brown and sand black.