Description
Light goes up and down from a single compact round body here, so a doorway gets a soft wash above and a pool below rather than one flat glare. The tube is slim, 70mm across and 150mm tall, and sits tight to the wall in the sand white finish: a quiet off-white that works over render, brick and painted timber alike. It takes GU10 lamps, and small reflector lamps give the neatest result.
This is the size we reach for on a narrow porch, either side of a front door, or along the passage at the side of a house where a bigger lantern would be in the way. It is sealed against rain and splashing, so an exposed wall, a patio corner or a garage elevation are all fair game. There is no switch on the body, so it works from an indoor switch or an outdoor control, and it is not a dimming fitting: full output every time you flick it on.
The body is finished in a fine matt white with no shine to catch the sun, and we stock the same round shape in anthracite, rust brown and sand black if you would rather the fitting disappeared into the wall behind it. A square version runs alongside it, and each shape is also offered with a single lamp. Keeping it clean is a small job: cut the power, let the lamps cool, then wipe the outside with a cloth and warm water and clear any grit or cobwebs from the rim before they mark the finish. It carries a two year warranty. Lamps are not supplied.
Specification
| Colour |
Sand White |
| Wall Mountable |
Yes |
| Weight |
0.52KG |
| Width |
70mm |
| Height |
150mm |
| Projection |
95mm |
| Materials Used |
Die-cast Aluminium, Glass |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
2 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Max Low Energy Lamp (W) |
10W |
| Light Distribution |
Up & Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
What lamps should I use in it?
Two GU10 lamps, one for each direction, rated up to 10W each. A 50mm reflector LED is the shape we would choose, as it beds neatly into the openings and throws a clean beam.
How far does it stand off the wall?
Projection is 95mm, with a width of 70mm and a height of 150mm, so it stays well clear of a door swing or a narrow path.
Can it be dimmed?
No. It is a non-dimmable fitting, so pair it with a standard on/off switch.
Is it suitable for a fully exposed wall?
Yes. With an IP54 rating it copes with rain and splashing, which covers open walls, patios and passageways.
How heavy is it?
It weighs 0.52kg, so it is a light fitting for its class.
Does the sand white stay white outdoors?
The matt finish is durable, though like any pale exterior fitting it will pick up airborne dirt over time. An occasional wipe with warm water keeps it looking fresh.