Description
A neat round body in anthracite, this one takes two GU10 reflector lamps and stands 150mm tall against the wall. Projection is a modest 95mm, so it sits close to the brickwork and stays clear of opening doors, gates and side passages where a wider fitting would be in the way. There is no switch on the housing, so it works from the switch already serving that point, and it is not dimmable. We like it for the quiet jobs around a house exterior, where light matters more than the fitting does.
It earns its place beside a front door, over a back step, on a garage flank or spaced along a boundary wall, and the compact round shape reads well on render, brick and painted timber alike. The rating covers dust and splashing water, so rain and the odd sweep of a hose are taken in its stride. It suits anyone lighting several points on one elevation without spending much per position, and it is one we reach for where a lantern would look too heavy for a modern porch.
Anthracite is a deep grey that sits almost black against dark brick and gives a clean contrast on pale render, and it disguises road film and rain marks better than a light finish does. For cleaning, isolate the supply first, then wipe the housing with a cloth wrung out in warm water and dry it off so nothing is left standing in the finish; cobwebs and grit tend to gather along the top edge outdoors, so a seasonal check is worth the minute it takes. The same round shape is offered in sand white, sand black and rust brown, and there is a square version in those finishes too, which makes mixing shapes across a frontage straightforward. It carries a two year warranty. Lamps are not included.
Specification
| Colour |
Anthracite |
| Wall Mountable |
Yes |
| Weight |
0.52KG |
| Width |
70mm |
| Height |
150mm |
| Projection |
95mm |
| Materials Used |
Die-cast Aluminium, Glass |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
2 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Max Low Energy Lamp (W) |
10W |
| Light Distribution |
Up & Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
Which lamps does it take?
Two GU10 lamps, up to 10W each, with a 50mm reflector diameter. LED is the sensible choice here. Lamps are supplied separately.
Can I dim it?
No, this one is not dimmable. Pair it with fixed-output GU10 LED lamps to avoid flicker or buzz.
Is there a switch on the fitting?
No. It is unswitched and controlled from the existing switch or circuit serving that position.
How much does it stand off the wall?
Projection is 95mm, with a width of 70mm and a height of 150mm, so it keeps a slim outline beside doors and windows.
Does it need an earth?
Yes. It is a Class 1 fitting and requires an earth connection.
How weatherproof is it?
It is rated against dust and splashing water, which covers normal exposed and sheltered exterior walls. It is not intended for immersion or direct high-pressure jets.