Itech 2W Round Ø170 Emergency LED Light IP65 - White

The Itech is a round emergency LED light rated at 2W, drawing 220-240V AC and delivering 245 lumens at a crisp 5000K daylight tone. The compact circular body measures Ø170 by 66.5mm, giving a low-profile fitting that sits close to ceiling or wall surfaces. Known across the trade as an emergency light fitting, this is the kind of self-contained emergency LED light that holds an internal battery and switches over the moment mains power is lost. The cool 5000K output is chosen deliberately for emergency use, since the higher colour temperature keeps signage and floor markings clearly visible during an evacuation.

Its job is escape-route and exit marking rather than general room brightness, so the 245 lumen output is sized to pick out corridors, stairwells, doorways and changes in level when the main lighting fails. The fitting suits commercial and industrial settings such as offices, warehouses, communal hallways and plant rooms, and the IP65 rating extends that to covered car parks, loading bays and exposed outdoor routes where damp or wet conditions are likely. Mount it where it can throw light along the line of travel toward the nearest exit, keeping the escape path readable rather than evenly lighting the space.

Built from white plastic with a Ø170 round housing, the fitting carries an IP65 weatherproof rating that makes it dust-tight and protected against water jets, so it copes with fully exposed outdoor and wet locations. The integrated LED and internal battery arrangement keeps the unit self-contained, with no separate luminaire required to provide the emergency function. The white finish keeps it discreet against painted ceilings and walls. Other wattage and diameter options sit within the Itech emergency range we stock if you need to match fittings across a larger site.

Is this a maintained or non-maintained emergency light?

This Itech fitting is designed as a non-maintained emergency light, meaning the LED stays off during normal operation and illuminates only when the mains supply fails. The internal battery takes over automatically to mark the escape route. Check the supplied data sheet to confirm the operating mode for your installation.

How long does the battery last in an emergency?

Self-contained emergency fittings of this type are typically rated to run for three hours on battery once mains power is lost, which is the standard duration for escape lighting in most commercial and industrial buildings. This gives ample time for a safe and orderly evacuation. The battery recharges automatically when normal power is restored.

Can it be used outdoors or in damp areas?

Yes. The IP65 rating means the fitting is dust-tight and protected against water jets, so it is suitable for fully exposed outdoor routes as well as wet or damp locations such as covered car parks and loading bays. This makes it a practical choice for escape paths that run outside the main building envelope.

How should the fitting be cleaned and maintained?

Wipe the white plastic housing with a soft, dry or slightly damp cloth, avoiding solvents that could mark the surface. Beyond cleaning, emergency fittings should be function-tested regularly so you know the battery still holds charge and the LED activates on power loss. A brief monthly check and a longer annual discharge test keep the unit compliant and ready.